P1306 Honda Code – Random Misfire Detected in Cylinder Number 6

What are the possible causes of DTC P1306 Honda?

NOTE: The listed causes may not be a complete list of all potential problems, and there may be other causes.

  • Check primary and secondary ignition
  • Check the fuel system – Fuel pressure and injector
  • Check for vacuum leaks
  • Check the mechanical condition of the engine
  • Faulty spark voltage detection module

How to repair DTC P1306 Honda?

Check the “Possible Causes” listed above. Visually inspect the wiring harness and related connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector pins. Look for Honda P1306 questions and answers:

What are the possible symptoms of Honda P1306 code?

  • Check engine light on (or soon-to-be engine maintenance warning light)

What does Honda P1306 code mean?

Cylinder number 6 random misfire detected is the generic description for Honda P1306 code, but the manufacturer may have a different description for your vehicle model and year. Currently, we do not have additional information about Honda P1306 OBDII code.

P1306 Code Hyundai – Low Input from Phase Sensor

What are the possible causes of DTC P1306 Hyundai?

NOTE: The causes listed may not be a complete list of all potential problems, and there may be other causes.

  • Faulty phase sensor
  • Phase sensor wiring harness is open or short-circuited
  • Poor electrical connection in the phase sensor circuit

How to repair DTC P1306 Hyundai?

Check the “Possible Causes” listed above. Visually inspect the wiring harness and related connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector pins. Search for P1306 Hyundai questions and answers:

What are the possible symptoms of Hyundai P1306 code?

  • Check engine light on (or engine maintenance warning light soon)

What does Hyundai P1306 code mean?

Low phase sensor input is the generic description for Hyundai P1306 code, but the manufacturer may have a different description for your vehicle model and year. Currently, we do not have additional information about Hyundai P1306 OBDII code.

Code P1307 – Accelerator Pedal Position Sensor Range/Performance

What are the possible causes of DTC P1307?

NOTE: The causes listed may not be a complete list of all potential problems, and there may be other causes.

  • Faulty acceleration sensor
  • Acceleration sensor harness is open or short-circuited
  • Poor electrical connection in the acceleration sensor circuit

How to repair DTC P1307?

Check the “Possible Causes” listed above. Visually inspect the wiring harness and related connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector pins.

What are the possible symptoms of code P1307?

  • Check engine light on (or engine maintenance warning light soon)

What does code P1307 mean?

The chassis acceleration sensor (rough road) consists of a piezoelectric vibration sensor that detects the vehicle’s vertical acceleration. The sensor signal is used by the ECM to determine the degree of vertical movement of the car, for example on a bumpy road. Since this can also cause irregular engine operation, the ECM uses the signal to distinguish this phenomenon from actual misfires.

P1307 Ford Code – Kickdown Relay Hold Circuit Malfunction

What are the possible causes of Ford DTC P1307?

NOTE: The listed causes may not be a complete list of all potential issues, and there could be other causes.

  • Faulty kickdown relay
  • Kickdown relay wiring harness is open or short-circuited
  • Poor electrical connection in the kickdown relay circuit

How to fix Ford DTC P1307?

Check the “Possible Causes” listed above. Visually inspect the wiring harness and related connectors. Look for damaged components and check for broken, bent, pushed out, or corroded connector pins. Search for Ford P1307 questions and answers:

What are the possible symptoms of Ford code P1307?

  • Check engine light on (or soon-to-be maintenance required warning light)

What does Ford code P1307 mean?

Kickdown relay hold circuit malfunction is the generic description for Ford code P1307, but the manufacturer may have a different description for your specific vehicle model and year. Currently, we do not have additional information regarding Ford OBDII P1307 code.

P1307 Code Hyundai – Throttle Position Sensor Range/Performance

What are the possible causes of DTC P1307 Hyundai?

NOTE: The causes listed may not be a complete list of all potential issues, and there may be other causes.

  • Faulty acceleration sensor
  • Acceleration sensor wiring harness is open or short-circuited
  • Poor electrical connection in the acceleration sensor circuit

How to repair DTC P1307 Hyundai?

Check the “Possible Causes” listed above. Visually inspect the wiring harness and related connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector pins. Search for P1307 Hyundai questions and answers:

When is Hyundai P1307 code detected?

If the value exceeds the threshold, the Engine Control Module (ECM) considers this a fault and P1307 is set.

What are the possible symptoms of Hyundai P1307 code?

  • Check Engine Light on (or Engine Maintenance Warning Light soon)

What does Hyundai P1307 code mean?

The chassis acceleration sensor (rough road) consists of a piezoelectric vibration sensor that detects the vehicle’s vertical acceleration. The sensor signal is used by the ECM to determine the degree of the car’s vertical movement, for example on a bumpy road. Since this can also cause irregular engine operation, the ECM uses the signal to distinguish the phenomenon from actual misfires.

P1307 Code KIA – Accelerator Pedal Sensor Range/Performance

What are the possible causes of DTC P1307 KIA?

NOTE: The listed causes may not be a complete list of all potential problems, and there may be other causes.

  • Faulty acceleration sensor
  • Acceleration sensor wiring harness is open or short-circuited
  • Poor electrical connection in the acceleration sensor circuit

How to repair DTC P1307 KIA?

Check the “Possible Causes” listed above. Visually inspect the wiring harness and related connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector pins. Search for P1307 KIA questions and answers:

When is the P1307 KIA code detected?

If the value exceeds the threshold, the Engine Control Module (ECM) considers this a fault and P1307 is set.

What are the possible symptoms of the P1307 KIA code?

  • Engine light on (or soon-to-be engine maintenance warning light)

What does the KIA P1307 code mean?

The chassis acceleration sensor (rough road) consists of a piezoelectric vibration sensor that detects the vehicle’s vertical acceleration. The sensor signal is used by the ECM to determine the degree of the car’s vertical movement, such as on a bumpy road. Since this can also cause irregular engine operation, the ECM uses the signal to distinguish the phenomenon from actual misfires.

P1308 Code – Low Input from Acceleration Sensor Circuit

What are the possible causes of DTC P1308?

NOTE: The listed causes may not be a complete list of all potential problems and there may be other causes.

  • Faulty acceleration sensor
  • Acceleration sensor wiring harness is open or short-circuited
  • Poor electrical connection in the acceleration sensor circuit

How to repair DTC P1308?

Check the “Possible Causes” listed above. Visually inspect the wiring harness and related connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector pins. Search for P1308 questions and answers:

What are the possible symptoms of code P1308?

  • Check engine light on (or service engine soon warning light)

What does code P1308 mean?

The chassis acceleration sensor (rough road) consists of a piezoelectric vibration sensor that detects the vehicle’s vertical acceleration. The sensor signal is used by the engine control module (ECM uses the signal to distinguish the phenomenon from actual misfires.) to determine the degree of the car’s vertical movement, for example on a bumpy road. Since this can also cause irregular engine operation, the

P1308 Ford Code – Air Conditioning Clutch Circuit Malfunction

What are the possible causes of Ford DTC P1308?

NOTE: The listed causes may not be a complete list of all potential problems, and there may be other causes.

  • Faulty air conditioning clutch relay
  • Air conditioning clutch relay harness is open or shorted
  • Poor electrical connection in the air conditioning clutch relay circuit

How to repair Ford DTC P1308?

Check the “Possible Causes” listed above. Visually inspect the wiring harness and related connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector pins.

What are the possible symptoms of Ford code P1308?

  • Check engine light on (or soon-to-be engine maintenance warning light)

What does Ford code P1308 mean?

Air conditioning clutch circuit malfunction is the generic description for Ford code P1308, but the manufacturer may have a different description for your vehicle model and year. Currently, we do not have additional information about Ford OBDII code P1308.

P1308 Code Hyundai – Low Input of Acceleration Sensor Circuit

What are the possible causes of DTC P1308 Hyundai?

NOTE: The listed causes may not be a complete list of all potential problems, and there may be other causes.

  • Faulty acceleration sensor
  • Acceleration sensor wiring harness is open or short-circuited
  • Poor electrical connection in the acceleration sensor circuit

How to repair DTC P1308 Hyundai?

Check the “Possible Causes” listed above. Visually inspect the wiring harness and related connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector pins.

When is Hyundai P1308 code detected?

If the value exceeds the threshold, the Engine Control Module (ECM) considers this a fault and P1308 is set.

What are the possible symptoms of Hyundai P1308 code?

  • Check engine light on (or engine maintenance warning light soon)

What does Hyundai P1308 code mean?

The chassis acceleration sensor (rough road) consists of a piezoelectric vibration sensor that detects the vehicle’s vertical acceleration. The sensor signal is used by the Engine Control Module (ECM uses the signal to distinguish the phenomenon from actual misfires.) to determine the degree of the car’s vertical movement, for example on a bumpy road. As this can also cause irregular engine operation

P1308 Code KIA – Low Input of Acceleration Sensor Circuit

What are the possible causes of DTC P1308 KIA?

NOTE: The listed causes may not be a complete list of all potential problems and there may be other causes.

  • Faulty acceleration sensor
  • Acceleration sensor harness is open or short-circuited
  • Poor electrical connection of the acceleration sensor circuit

How to repair DTC P1308 KIA?

Check the “Possible Causes” listed above. Visually inspect the wiring harness and related connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector pins.

When is KIA code P1308 detected?

If the value exceeds the threshold value, the Engine Control Module (ECM) judges this as a fault and P1308 is set.

What are the possible symptoms of KIA code P1308?

  • Engine light on (or engine maintenance warning light soon)

What does KIA code P1308 mean?

The chassis acceleration sensor (rough road) consists of a piezoelectric vibration sensor that detects the vehicle’s vertical acceleration. The sensor signal is used by the Engine Control Module (ECM uses the signal to distinguish the phenomenon from actual misfires.) to determine the degree of the car’s vertical movement, for example on a bumpy road. As this can also cause irregular engine operation, the