B0018 – Passenger Front Deployment Loop Voltage Out of Range

B0018 Possible Causes

  • Faulty dashboard airbag
  • Dashboard airbag restraint harness is open or short-circuited
  • Poor electrical connection of the dashboard airbag restraint circuit
  • Faulty Sensing and Diagnostic Module (SDM)

How is B0018 Code Repaired?

Start by checking the “possible causes” listed above. Visually inspect the corresponding wiring harness and connectors. Look for damaged components and check for broken, bent, pushed out, or corroded connector pins.

Possible Symptoms

  • Airbag warning light illuminated

B0018 Meaning

The deployment loop of the instrument panel (I/P) airbag restraint module consists of a two-stage I/P module, an I/P module high control module, and I/P module low control circuits for both stages 1 and 2. There are 2 shorting bars used in the I/P module connector that will short together the I/P module high and I/P module low control circuits for both stages 1 and 2 when the connector is disconnected. This helps prevent unwanted deployment of the airbag module during maintenance. When the ignition is turned ON, the Sensing and Diagnostic Module (SDM) performs continuous diagnostic tests on the deployment loops to check circuit continuity and shorts to ground or voltage. If a malfunction is detected, a Diagnostic Trouble Code (DTC) will be stored in memory.

B0018 BUICK – Passenger Frontal Deployment Loop Voltage Out of Range

B0018 BUICK Possible Causes

  • Faulty airbag dashboard
  • Airbag dashboard harness is open or short-circuited
  • Poor electrical connection of the airbag dashboard circuit
  • Faulty Sensing and Diagnostic Module (SDM)

How to Fix B0018 BUICK Code?

Start by checking the “possible causes” listed above. Visually inspect the corresponding wiring harness and connectors. Look for damaged components and check for broken, bent, pushed, or corroded connector pins.

Possible Symptoms

  • Airbag warning light on

B0018 BUICK Meaning

The deployment loop of the Instrument Panel (I/P) airbag restraint module consists of a two-stage I/P module, an I/P module high control module, and I/P module low control circuits for both stages 1 and 2. There are 2 shorting bars used in the I/P module connector that will short together the I/P module high and I/P module low control circuits for both stages 1 and 2 when the connector is disconnected. This helps prevent unwanted deployment of the airbag module during maintenance. When the ignition is turned ON, the Sensing and Diagnostic Module (SDM) performs continuous diagnostic tests on the deployment loops to check circuit continuity and shorts to ground or voltage. If a malfunction is detected, a Diagnostic Trouble Code (DTC) will be stored in memory.

B0018 CADILLAC – Passenger Front Deployment Loop Voltage Out of Range

B0018 CADILLAC Possible Causes

  • Faulty airbag dashboard
  • Airbag dashboard harness is open or short-circuited
  • Poor electrical connection of the airbag dashboard circuit
  • Faulty Sensing and Diagnostic Module (SDM)

How to Fix B0018 CADILLAC Code?

Start by checking the “possible causes” listed above. Visually inspect the corresponding wiring harness and connectors. Look for damaged components and check for broken, bent, pushed out, or corroded connector pins.

Possible Symptoms

  • Airbag warning light on

B0018 CADILLAC Meaning

The deployment loop of the Instrument Panel (I/P) airbag module consists of a two-stage I/P module, an I/P module high control module, and I/P module low control circuits for both stages 1 and 2. There are 2 shorting bars used in the I/P module connector that will short together the I/P module high and I/P module low control circuits for both stages 1 and 2 when the connector is disconnected. This helps prevent unwanted deployment of the airbag module during maintenance. When the ignition is turned ON, the Sensing and Diagnostic Module (SDM) performs continuous diagnostic tests on the deployment loops to check for circuit continuity and shorts to ground or voltage. If a malfunction is detected, a Diagnostic Trouble Code (DTC) will be stored in memory.

B0018 CHEVROLET – Passenger Frontal Deployment Loop Voltage Out of Range

B0018 CHEVROLET Possible Causes

  • Faulty airbag module
  • Airbag module harness is open or shorted
  • Poor electrical connection in the airbag module circuit
  • Faulty Sensing and Diagnostic Module (SDM)

How to Fix B0018 CHEVROLET Code?

Start by checking the “Possible Causes” listed above. Visually inspect the related wiring harness and connectors. Look for damaged components and check for broken, bent, pushed out, or corroded connector pins.

Possible Symptoms

  • Airbag warning light illuminated

B0018 CHEVROLET Meaning

The Instrument Panel (I/P) airbag module deployment loop consists of a dual-stage I/P module, I/P module high control circuit, and I/P module low control circuits for both stage 1 and stage 2. There are 2 shorting bars used in the I/P module connector that will short together the I/P module high and I/P module low control circuits for both stage 1 and stage 2 when the connector is disconnected. This helps prevent unwanted deployment of the airbag module during service. When the ignition is turned ON, the Sensing and Diagnostic Module (SDM) performs continuous diagnostic tests on the deployment loops to check for circuit continuity and shorts to ground or voltage. If a malfunction is detected, a Diagnostic Trouble Code (DTC) will be stored in memory.

B0018 GMC – Passenger Frontal Deployment Loop Voltage Out of Range

B0018 GMC Possible Causes

  • Faulty dashboard airbag
  • Dashboard airbag restraint harness is open or short-circuited
  • Poor electrical connection of the dashboard airbag restraint circuit
  • Faulty Sensing and Diagnostic Module (SDM)

How to Fix B0018 GMC Code?

Start by checking the “possible causes” listed above. Visually inspect the corresponding wiring harness and connectors. Look for damaged components and check for broken, bent, pushed out, or corroded connector pins.

Possible Symptoms

  • Airbag warning light on

B0018 GMC Meaning

The deployment loop of the Instrument Panel (I/P) airbag restraint module consists of a two-stage I/P module, an I/P module high control module, and I/P module low control circuits for both stages 1 and 2. There are 2 shorting bars used in the I/P module connector that will short together the I/P module high and I/P module low control circuits for both stages 1 and 2 when the connector is disconnected. This helps prevent unwanted deployment of the airbag module during maintenance. When the ignition is turned ON, the Sensing and Diagnostic Module (SDM) performs continuous diagnostic tests on the deployment loops to check circuit continuity and shorts to ground or voltage. If a malfunction is detected, a Diagnostic Trouble Code (DTC) will be stored in memory.

B0018 PONTIAC – Passenger Frontal Deployment Loop Voltage Out of Range

B0018 PONTIAC Possible Causes

  • Faulty airbag dashboard
  • Airbag dashboard harness is open or short-circuited
  • Poor electrical connection of the airbag dashboard circuit
  • Faulty Sensing and Diagnostic Module (SDM)

How to Fix B0018 PONTIAC Code?

Start by checking the “possible causes” listed above. Visually inspect the corresponding wiring harness and connectors. Look for damaged components and check for broken, bent, pushed out, or corroded connector pins.

Possible Symptoms

  • Airbag warning light on

B0018 PONTIAC Meaning

The deployment loop of the Instrument Panel (I/P) airbag module consists of a two-stage I/P module, an I/P module high control module, and I/P module low control circuits for both stages 1 and 2. There are 2 shorting bars used in the I/P module connector that will short together the I/P module high and I/P module low control circuits for both stages 1 and 2 when the connector is disconnected. This helps prevent unwanted deployment of the airbag module during maintenance. When the ignition is turned ON, the Sensing and Diagnostic Module (SDM) performs continuous diagnostic tests on the deployment loops to check for circuit continuity and shorts to ground or voltage. If a malfunction is detected, a Diagnostic Trouble Code (DTC) will be stored in memory.

B0018 SATURN – Passenger Front Deployment Loop Tension Out of Range

B0018 SATURN Possible Causes

  • Faulty airbag dashboard
  • Airbag restraint dashboard harness is open or short-circuited
  • Poor electrical connection of the airbag restraint dashboard circuit
  • Faulty Sensing and Diagnostic Module (SDM)

How to Fix B0018 SATURN Code?

Start by checking the “possible causes” listed above. Visually inspect the corresponding wiring harness and connectors. Look for damaged components and check for broken, bent, pushed out, or corroded connector pins.

Possible Symptoms

  • Airbag warning light on

B0018 SATURN Meaning

The deployment loop of the instrument panel (I/P) airbag restraint module consists of a two-stage I/P module, an I/P module high control module, and I/P module low control circuits for both stages 1 and 2. There are 2 shorting bars used in the I/P module connector that will short together the I/P module high and I/P module low control circuits for both stages 1 and 2 when the connector is disconnected. This helps prevent unwanted deployment of the airbag module during maintenance. When the ignition is turned ON, the Sensing and Diagnostic Module (SDM) performs continuous diagnostic tests on the deployment loops to check for circuit continuity and shorts to ground or voltage. If a malfunction is detected, a Diagnostic Trouble Code (DTC) will be stored in memory.

B0019 – Passenger Front Deployment Loop Step 1

B0019 Possible Causes

  • Faulty passenger front module
  • Passenger front module wiring harness is open or shorted
  • Poor electrical connection in the passenger front module circuit
  • Faulty Sensing and Diagnostic Module (SDM)

How is B0019 Code Repaired?

Start by checking the “Possible Causes” listed above. Visually inspect the corresponding wiring harness and connectors. Look for damaged components and check for broken, bent, pushed out, or corroded connector pins.

Technical Notes

DTC B0019 01 Passenger Front Stage 1 Deployment Loop Short to Battery

DTC B0019 02 Passenger Front Stage 1 Deployment Loop Short to Ground
DTC B0019 04 Passenger Front Stage 1 Deployment Loop Open Circuit
DTC B0019 0D Passenger Front Stage 1 Deployment Loop Resistance Above Threshold
DTC B0019 0E Passenger Front Stage 1 Deployment Loop Resistance Below Threshold

Possible Symptoms

  • Airbag warning light illuminated

B0019 Meaning

During a side or frontal collision of sufficient force, the Sensing and Diagnostic Module (SDM) of the airbag restraint system will allow current to flow through the deployment loop to deploy an airbag restraint module. There are 2 shorting bars used in the module connector that will short the high and low circuits together when the connector is disconnected. This helps prevent accidental deployment of the inflatable module during maintenance.

B0019 BUICK – Passenger Front Deployment Loop Stage 1

B0019 BUICK Possible Causes

  • Faulty passenger front module
  • Passenger front module harness is open or shorted
  • Poor electrical connection in passenger front module circuit
  • Faulty Sensing and Diagnostic Module (SDM)
 

How to Fix B0019 BUICK Code?

Start by checking the “possible causes” listed above. Visually inspect the related wiring harness and connectors. Look for damaged components and check for broken, bent, pushed out, or corroded connector pins.

Technical Notes

DTC B0019 01 Passenger Frontal Deployment Loop Stage 1 Short to Battery
DTC B0019 02 Passenger Frontal Deployment Loop Stage 1 Short to Ground
DTC B0019 04 Passenger Frontal Deployment Loop Stage 1 Circuit Open

DTC B0019 0D Passenger Frontal Deployment Loop Stage 1 Resistance Above Threshold
DTC B0019 0E Passenger Frontal Deployment Loop Stage 1 Resistance Below Threshold

 
 

Possible Symptoms

  • Airbag warning light on
 

B0019 BUICK Meaning

During a side or frontal collision of sufficient force, the inflatable restraint Sensing and Diagnostic Module (SDM) will allow current to flow through the deployment loop to deploy an inflatable restraint module. There are 2 shorting bars used in the module connector that will short the high and low circuits together when the connector is disconnected. This helps prevent unwanted deployment of the inflator module during service.

B0019 CADILLAC – Passenger Front Deployment Loop Stage 1

B0019 CADILLAC Possible Causes

  • Faulty front passenger module
  • Front passenger module wiring harness is open or shorted
  • Poor electrical connection in the front passenger module circuit
  • Faulty Sensing and Diagnostic Module (SDM)

How to Fix B0019 CADILLAC Code?

Start by checking the “possible causes” listed above. Visually inspect the corresponding wiring harness and connectors. Look for damaged components and check for broken, bent, pushed out, or corroded connector pins.

Technical Notes

DTC B0019 01 Passenger Front Deployment Loop Stage 1 Short to Battery
DTC B0019 02 Passenger Front Deployment Loop Stage 1 Short to Ground
DTC B0019 04 Passenger Front Deployment Loop Stage 1 Circuit Open

DTC B0019 0D Passenger Front Deployment Loop Stage 1 Resistance Above Threshold
DTC B0019 0E Passenger Front Deployment Loop Stage 1 Resistance Below Threshold

Possible Symptoms

  • Airbag warning light illuminated

B0019 CADILLAC Meaning

During a side or frontal collision of sufficient force, the Sensing and Diagnostic Module (SDM) of the inflatable restraint system will allow current to flow through the deployment loop to deploy an inflatable restraint module. There are 2 shorting bars used in the module connector that will short the high and low circuits together when the connector is disconnected. This helps prevent accidental deployment of the inflator module during maintenance.