P1345 Code KIA – No Signal from Camshaft Position Sensor

Possible Causes

NOTE: The listed causes may not be a complete list of all potential problems and there may be other causes.

  • Faulty camshaft position sensor
  • Camshaft position sensor harness is open or shorted
  • Poor electrical connection in camshaft position sensor circuit

Description

No camshaft position sensor signal is the generic description for KIA P1345 code, but the manufacturer may have a different description for your vehicle model and year. Currently, we have no other information about KIA OBDII P1345 code.

How to Fix

Check the “Possible Causes” listed above. Visually inspect the wiring harness and related connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector pins.

Possible Symptoms

  • Engine light on (or service engine soon warning light)
  • Lack/loss of power
  • Engine stalling

P1345 Code Lexus – Variable Valve Timing Sensor Bank 1 Malfunction

Possible Causes

NOTE: The listed causes may not be a complete list of all potential problems and there may be other causes.

  • Faulty Variable Valve Timing (VVT) sensor
  • Variable Valve Timing (VVT) sensor harness is open or short-circuited
  • Poor electrical connection in the Variable Valve Timing (VVT) sensor circuit
  • Engine Control Module (ECM)

Description

The Variable Valve Timing (VVT) sensor (VVT signal) consists of a signal plate and a detection coil. The VVT signal plate has 1 tooth on its outer circumference and is mounted on the intake camshafts. When the camshafts rotate, the protrusion of the signal plate and the air gap of the detection coil change, causing fluctuations in the magnetic field and generating an electromotive force in the detection coil. The actual camshaft angle is detected by the VVT sensor and it provides feedback to the Engine Control Module (ECM) to control the intake valve timing in response to the condition.

How to Repair

Check the “Possible Causes” listed above. Visually inspect the wiring harness and related connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector pins.

Detected

No signal from the Variable Valve Timing (VVT) sensor to the Engine Control Module (ECM) during startup for 4 seconds or more.

Possible Symptoms

  • Engine light on (or engine maintenance warning light soon)

P1345 Mazda Code – Erratic Camshaft Position Sensor Signal

Possible Causes

NOTE: The listed causes may not be a complete list of all potential problems and there may be other causes.

  • Faulty camshaft position sensor
  • Camshaft position sensor harness is open or shorted
  • Poor electrical connection in the camshaft position sensor circuit

Description

The camshaft position sensor is an electronic device used in an engine to record the speed at which the camshaft rotates. This information is used by the Engine Control Module (ECM) to control ignition and fuel injection. The camshaft position sensor detects the retraction of the camshaft (intake) to identify a specific cylinder. The camshaft position sensor detects the piston position. The sensor system consists of a rotating part, typically a disk, as well as a static part, the sensor itself.
When the engine rotates, the high and low parts of the teeth cause a change in the gap with the sensor. The changing gap results in a modification of the magnetic field near the sensor. The change in the magnetic field causes a variation in the sensor voltage.
When the crankshaft position sensor (POS) system becomes inoperative, the camshaft position sensor instead provides various commands for engine components, using the timing of cylinder identification signals.

P1341 Mazda Code – Range/performance of camshaft position sensor circuit “B”

How to Repair

Check the “Possible Causes” listed above. Visually inspect the wiring harness and related connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector pins.

Possible Symptoms

  • Engine light on (or engine maintenance warning light soon)

P1345 MINI Code – Cylinder 2 Misfire with Fuel Cut-Off

Possible Causes

NOTE: The listed causes may not be a complete list of all potential problems and there may be other causes.

  • Faulty ignition coil
  • Intake vacuum leak
  • Faulty camshaft position sensor
  • Ignition coil harness is open or shorted
  • Poor electrical connection in the ignition coil circuit

Description

Under CARB/OBD regulations, the Engine Control Module (ECM) must determine if a misfire is occurring and also identify the specific cylinder(s) and the severity of the misfire event, and whether it is an emissions problem or if it damages the catalyst. To accomplish these tasks, the control module monitors the crankshaft for acceleration losses during the firing segments of each cylinder based on the firing order.
The misfire/engine roughness calculation is derived from differences in the period duration (T) of individual gear segments. Each segment period consists of an angular range of 120° crankshaft angle that begins 78° before top dead center (TDC).
If the expected period duration is greater than the allowed value, a misfire fault for the affected cylinder is stored in the ECM‘s fault memory. Depending on the measured misfire level, the control unit will illuminate the Service Engine Soon light, may cut fuel to the particular cylinder, and may switch lambda operation to open loop. All misfire faults are weighted to determine if the misfires are emissions-related or damaging to the catalyst.

How to Repair

Check the “Possible Causes” listed above. Visually inspect the wiring harness and associated connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector pins.

Possible Symptoms

  • Engine light on (or Service Engine Soon warning light)

P1345 Toyota Code – Variable Valve Timing Bank 1 Sensor Malfunction

Possible Causes

NOTE: The listed causes may not be a complete list of all potential problems and there may be other causes.

  • Faulty Variable Valve Timing (VVT) sensor
  • Variable Valve Timing (VVT) sensor harness is open or shorted
  • Poor electrical connection in the Variable Valve Timing (VVT) sensor circuit
  • Engine Control Module (ECM)

Description

The Variable Valve Timing (VVT) sensor (VVT signal) consists of a signal plate and a detection coil. The VVT signal plate has 1 tooth on its outer circumference and is mounted on the intake camshafts. When the camshafts rotate, the protrusion of the signal plate and the air gap of the detection coil change, causing fluctuations in the magnetic field and generating an electromotive force in the detection coil. The actual camshaft angle is detected by the VVT sensor and it provides feedback to the Engine Control Module (ECM) to control the intake valve timing in response to the condition.

How to Repair

Check the “Possible Causes” listed above. Visually inspect the wiring harness and related connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector pins.

Detected

No signal from the Variable Valve Timing (VVT) sensor to the Engine Control Module (ECM) during startup for 4 seconds or more.

Possible Symptoms

  • Engine light on (or engine maintenance warning light soon)

P1345 Code Volkswagen – Coil Ignition Output Stage 3 Short to Ground

Possible Causes

NOTE: The listed causes may not be a complete list of all potential problems and there may be other causes.

  • Faulty ignition coil
  • Ignition coil harness is open or shorted
  • Poor electrical connection in ignition coil circuit

Description

Ignition Coil Output Stage 3 Short To Ground is the generic description for Volkswagen code P1345, but the manufacturer may have a different description for your specific model and vehicle year. Currently, we have no additional information about Volkswagen OBDII code P1345.

P1341 Mazda Code – Range/Performance of Camshaft Position Sensor “B” Circuit

30 Suggested Automotive Maintenance Tasks and Intervals

How to Repair

Check the “Possible Causes” listed above. Visually inspect the wiring harness and related connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector pins.

Possible Symptoms

  • Engine light on (or service engine soon warning light)

P1346 Code – Bank 1 Variable Valve Timing Sensor Range/Performance Problem

Possible Causes

NOTE: The listed causes may not be a complete list of all potential problems and there may be other causes.

  • Faulty Variable Valve Timing (VVT) sensor
  • Variable Valve Timing (VVT) sensor wiring harness is open or short-circuited
  • Poor electrical connection in the Variable Valve Timing (VVT) sensor circuit
  • Engine Control Module (ECM)

Description

The Variable Valve Timing (VVT) sensor (VVT signal) consists of a signal plate and a detection coil. The VVT signal plate has 1 tooth on its outer circumference and is mounted on the intake camshafts. When the camshafts rotate, the protrusion of the signal plate and the air gap of the detection coil change, causing fluctuations in the magnetic field and generating an electromotive force in the detection coil. The actual angle of the camshaft is detected by the VVT sensor and it provides feedback to the Engine Control Module (ECM) to control the intake valve timing in response to the condition.

How to Repair

Check the “Possible Causes” listed above. Visually inspect the wiring harness and related connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector pins.

Possible Symptoms

  • Engine light on (or engine maintenance warning light soon)

P1346 Audi Code – Ignition Coil Output Stage 3 Shorted to B+

Possible Causes

NOTE: The listed causes may not be a complete list of all potential issues and there may be other causes.

  • Faulty ignition coil
  • Ignition coil harness is open or shorted
  • Poor electrical connection in ignition coil circuit

Description

Ignition Coil Output Stage 3 Short To B+ is the generic description for Audi code P1346, but the manufacturer may have a different description for your specific vehicle model and year. Currently, we have no further information about Audi OBDII code P1346.

How to Repair

Check the “Possible Causes” listed above. Visually inspect the wiring harness and related connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector pins.

Possible Symptoms

  • Engine light on (or service engine soon warning light)

BMW Code P1346 – Cylinder 3 Misfire During Start

Possible Causes

NOTE: The listed causes may not be a complete list of all potential issues and there may be other causes.

  • Faulty spark plug
  • Faulty ignition coil
  • Intake vacuum leak
  • Faulty camshaft position sensor
  • Ignition coil harness is open or shorted
  • Poor electrical connection in ignition coil circuit

Description

Under CARB/OBD regulations, the Engine Control Module (ECM) must determine if a misfire is occurring and also identify the specific cylinder(s) and severity of the misfire event and whether it is an emissions problem or damaging to the catalyst. To accomplish these tasks, the control module monitors the crankshaft for acceleration losses during the firing segments of each cylinder according to the firing order.
The misfire/engine roughness calculation is derived from differences in the period duration (T) of individual gear segments. Each segment period consists of an angular range of 120° crankshaft angle that begins 78° before top dead center (TDC).
If the expected period duration is greater than the allowed value, a misfire fault for the affected cylinder is stored in the ECM fault memory. Depending on the measured misfire level, the control unit will illuminate the Service Engine Soon light, may cut fuel to the particular cylinder, and may switch lambda operation to open loop. All misfire faults are weighted to determine whether misfires are emissions-related or damaging the catalyst.

How to Repair

Check the “Possible Causes” listed above. Visually inspect the wiring harness and associated connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector pins.

Possible Symptoms

  • Engine light on (or service engine soon warning light)

P1346 Buick Code – Intake Camshaft Position Sensor System Performance

Possible Causes

NOTE: The listed causes may not be a complete list of all potential problems and there may be other causes.

  • Faulty intake camshaft position sensor
  • Faulty camshaft position solenoid valve
  • Engine mechanical condition
  • Valve timing off
  • Intake camshaft position sensor harness is open or shorted
  • Poor electrical connection in the intake camshaft position sensor circuit

Description

The camshaft position (CMP) sensor input is used to detect engine misfire. The powertrain control module (PCM) also uses the CMP sensor signal as an input to modify fuel injection timing and to adjust ignition timing.
The PCM receives information about engine status from various engine sensors, then selects the most appropriate ignition timing settings from the PCM programming. Here are the most important pieces of information for determining ignition timing requirements:
– Engine speed
– Throttle position (TP)
– Intake air volume
– Engine coolant temperature (ECT)
– Knock sensor (KS) input

How to Repair

Check the “Possible Causes” listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector pins.

Detected

The powertrain control module (PCM) detected that the actual cam timing and target cam timing did not match

Possible Symptoms

  • Engine light on (or service engine soon warning light)
  • Engine hard to start