Replacement: front lower arm – Mercedes W203. recommends:
- The replacement procedure is identical for the left and right lower suspension arms.
- Caution: all work on the car – Mercedes W203 – must be performed with the engine off.
Perform the replacement in the following order:
-
Step 1Secure the wheels with chocks. -
Step 2Loosen the wheel mounting bolts. Use the No. 17 wheel impact socket. -
Step 3Lift the front of the car and secure it on stands. -
Step 4Unscrew the wheel bolts.recommends:Warning! To avoid injury, hold the wheel while unscrewing the mounting bolts. Mercedes W203 -
Step 5Remove the wheel. -
Step 6Loosen the fasteners of the lower oil pan cover. Use a No. 8 drive socket. Use a ratchet wrench. -
Step 7Remove the oil pan cover. -
Step 8Clean all the arm joints. Use a wire brush. Use WD-40 spray.recommends:Replacement: front lower arm – Mercedes W203. After applying the spray, wait a few minutes. -
Step 9Unscrew the attachment connecting the control arm to the subframe. Use a No. 21 combination wrench. Use a No. 21 drive socket. Use a ratchet wrench. -
Step 10Clean all the arm joints. Use a wire brush. Use WD-40 spray.recommends:Replacement: front lower arm – Mercedes W203. After applying the spray, wait a few minutes. -
How to Change the Spark Plug on a MERCEDES-BENZ C W203
Replacement: Spark Plugs – Mercedes W203. Professionals Recommend:- The replacement procedure is the same for all spark plugs.
- Warning! Stop the engine before starting any work – Mercedes W203.
Perform the replacement in the following order:-
Step 1Open the hood. -
Step 2Use a fender protection cover to avoid damaging the car’s paint and plastic parts. -
Step 3Unscrew the engine cover screws (3 pieces). Use HEX No. HW5. -
Step 4Remove the engine cover. -
Step 5Unscrew the ignition coil fasteners. Use a #E8 drive socket. -
Step 6Remove the ignition coils from the spark plug wells.Replacement: Spark Plugs – Mercedes W203. AUTODOC Tip:Remember the sequence of steps for disassembling the ignition coil. -
Step 7Clean dirt, dust, and debris from inside the spark plug wells. -
Step 8Unscrew the spark plugs. Use spark plug socket No. 16. Use a ratchet wrench. -
Step 9Remove the spark plugs. -
Step 10Apply a thin layer of a special high-temperature anti-seize lubricant to the threads of the new spark plugs. Treat the surface of the terminals of the new spark plugs. Use an electronic spray. -
How to Change the Serpentine Belt on a MERCEDES-BENZ W203 C-Class
Replacement: serpentine belt – Mercedes W203. Expert recommendations:- All work must be performed with the engine turned off.
Perform the replacement in the following order:-
Step 1Open the hood. -
Step 2Use a fender protection cover to avoid damaging the car’s paint and plastic parts. -
Step 3Remove the engine cover.AUTODOC recommends:Replacement: serpentine belt – Mercedes W203. Do not use excessive force when removing the part as it could damage it. -
Step 4Remove the air intake hoses. -
Step 5Move the V-belt tensioner pulley aside. Use a 16 mm combination wrench. -
Step 6Remove the V-ribbed belt.Replacement: serpentine belt – Mercedes W203. AUTODOC recommends:Check the condition of the tensioner pulley and the idler pulley. Replace them if necessary. -
Step 7Return the tensioner pulley to its initial position.Step 8Install the V-ribbed belt.Replacement: serpentine belt – Mercedes W203. AUTODOC tip:Make sure the V-belt fits perfectly on all pulleys. -
Step 9Move the V-belt tensioner pulley aside. Use a 16 mm combination wrench. -
Step 10Place the V-belt on the tensioner pulley. -
Step 11Return the tensioner pulley to its initial position. Use a 16 mm combination wrench.