P247E – Exhaust Gas Temperature Out of Range, Bank 2 Sensor 3

P247E Possible Causes

  • Faulty exhaust gas temperature sensor (EGTS), bank 2 sensor 3
  • Exhaust gas temperature sensor, bank 2 sensor 3 harness is open or short-circuited
  • Poor electrical connection in bank 2 sensor 3 circuit of exhaust gas temperature sensor
  • Exhaust leaks
  • Excessive particulate accumulation on the sensor

How to Fix Code P247E

Check the “Possible Causes” listed above. Visually inspect the wiring harness and related connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector pins.

P247E

Symptoms

Possible

Check engine light illuminated (or service engine soon warning light)

P247E Meaning

The powertrain control module (PCM) continuously monitors the exhaust gas temperature sensor (EGTS) for proper circuit continuity and out-of-range high values. The EGTS is located upstream of the diesel oxidation catalyst (DOC) and/or upstream of the diesel particulate filter (DPF). The EGTS detects exhaust gas temperature and converts it to voltage, sending it back to the PCM with the voltage signal to control engine conditions for effective emission reduction. The PCM sets OBDII code P247E when the exhaust gas temperature sensor is outside factory specifications.

P247F – Exhaust Gas Temperature Out of Range, Bank 2, Sensor 4

P247F Possible Causes

  • Faulty Exhaust Gas Temperature Sensor (EGTS), Bank 2 Sensor 4
  • Exhaust Gas Temperature Sensor, Bank 2 Sensor 4 harness is open or short-circuited
  • Poor electrical connection in Bank 2 Sensor 4 circuit of the Exhaust Gas Temperature Sensor
  • Exhaust leaks
  • Excessive particulate buildup on the sensor

How to Fix Code P247F

Check the “Possible Causes” listed above. Visually inspect the wiring harness and related connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector pins.

P247F

Symptoms

Possible

Engine light on (or service engine soon warning light)

P247F Meaning

The Powertrain Control Module (PCM) continuously monitors the Exhaust Gas Temperature Sensor (EGTS) for proper circuit continuity and out-of-range high values. The EGTS is located in front of the Diesel Oxidation Catalyst (DOC) and/or in front of the Diesel Particulate Filter (DPF). The EGTS detects exhaust gas temperature and converts it to voltage, sending it back to the PCM with the voltage signal to control engine conditions for effective emission reduction. The PCM sets the OBDII code P247F when the Exhaust Gas Temperature Sensor is outside factory specifications.

P2480 – Exhaust Gas Temperature Sensor Circuit / Open Circuit 1 Sensor 5

P2480 Possible Causes

  • Faulty Exhaust Gas Temperature Sensor (EGTS), Bank 1 Sensor 5
  • Exhaust Gas Temperature Sensor, Bank 1 Sensor 5 harness is open or short-circuited
  • Poor electrical connection in Bank 1 Sensor 5 circuit of the Exhaust Gas Temperature Sensor
  • Exhaust leaks
  • Excessive particulate buildup on the sensor

How to Fix Code P2480

Check the “Possible Causes” listed above. Visually inspect the wiring harness and related connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector pins.

P2480

Symptoms

Possible

Check Engine Light illuminated (or Service Engine Soon warning light)

P2480 Meaning

The Powertrain Control Module (PCM) continuously monitors the Exhaust Gas Temperature Sensor (EGTS) for proper circuit continuity and out-of-range high values. The EGTS is located upstream of the Diesel Oxidation Catalyst (DOC) and/or upstream of the Diesel Particulate Filter (DPF). The EGTS detects exhaust gas temperature and converts it to voltage, sending it back to the PCM with the voltage signal to control engine conditions for effective emission reduction. The PCM sets OBDII code P2480 when the exhaust gas temperature sensor is outside factory specifications.

P2481 – Exhaust Gas Temperature Sensor Circuit, Bank 1, Sensor 5

P2481 Possible Causes

  • Faulty Exhaust Gas Temperature Sensor (EGTS), Bank 1 Sensor 5
  • Exhaust Gas Temperature Sensor, Bank 1 Sensor 5 wiring harness is open or short-circuited
  • Poor electrical connection in Bank 1 Sensor 5 circuit of the Exhaust Gas Temperature Sensor
  • Exhaust leaks
  • Excessive particulate buildup on the sensor

How to Fix Code P2481

Check the “Possible Causes” listed above. Visually inspect the wiring harness and related connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector pins.

P2481

Symptoms

Possible

Check Engine Light illuminated (or Service Engine Soon warning light)

P2481 Meaning

The Powertrain Control Module (PCM) continuously monitors the Exhaust Gas Temperature Sensor (EGTS) for proper circuit continuity and out-of-range high values. The EGTS is located upstream of the Diesel Oxidation Catalyst (DOC) and/or upstream of the Diesel Particulate Filter (DPF). The EGTS detects exhaust gas temperature and converts it to voltage, sending it back to the PCM with the voltage signal to control engine conditions for effective emission reduction. The PCM sets OBDII code P2481 when the Exhaust Gas Temperature Sensor is outside factory specifications.

P2482 – High Value of Exhaust Gas Temperature Sensor Circuit, Bank 1 Sensor 5

P2482 Possible Causes

  • Faulty Exhaust Gas Temperature Sensor (EGTS), Bank 1 Sensor 5
  • Exhaust Gas Temperature Sensor, Bank 1 Sensor 5 wiring harness is open or short-circuited
  • Poor electrical connection in Bank 1 Sensor 5 circuit of the Exhaust Gas Temperature Sensor
  • Exhaust leaks
  • Excessive particulate buildup on the sensor

How to Fix Code P2482

Check the “Possible Causes” listed above. Visually inspect the wiring harness and related connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector pins.

P2482

Symptoms

Possible

Check Engine Light illuminated (or Service Engine Soon warning light)

P2482 Meaning

The Powertrain Control Module (PCM) continuously monitors the Exhaust Gas Temperature Sensor (EGTS) for proper circuit continuity and out-of-range high values. The EGTS is located in front of the Diesel Oxidation Catalyst (DOC) and/or in front of the Diesel Particulate Filter (DPF). The EGTS detects exhaust gas temperature and converts it to voltage, sending it back to the PCM with the voltage signal to control engine conditions for effective emission reduction. The PCM sets OBDII code P2482 when the exhaust gas temperature sensor is outside factory specifications.

P2483 – Exhaust Gas Temperature Sensor Circuit Range/Performance, Bank 1 Sensor 5

P2483 Possible Causes

  • Faulty Exhaust Gas Temperature Sensor (EGTS), Bank 1 Sensor 5
  • Exhaust Gas Temperature Sensor, Bank 1 Sensor 5 harness is open or short-circuited
  • Poor electrical connection in Bank 1 Sensor 5 circuit of the Exhaust Gas Temperature Sensor
  • Exhaust leaks
  • Excessive particulate buildup on the sensor

How to Fix Code P2483

Check the “Possible Causes” listed above. Visually inspect the wiring harness and related connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector pins.

P2483

Symptoms

Possible

Engine light on (or service engine soon warning light)

P2483 Meaning

The Powertrain Control Module (PCM) continuously monitors the Exhaust Gas Temperature Sensor (EGTS) for proper circuit continuity and out-of-range high values. The EGTS is located in front of the Diesel Oxidation Catalyst (DOC) and/or in front of the Diesel Particulate Filter (DPF). The EGTS detects exhaust gas temperature and converts it to voltage, sending it back to the PCM with the voltage signal to control engine conditions for effective emission reduction. The PCM sets the OBDII code P2483 when the exhaust gas temperature sensor is outside factory specifications.

P2484 – Intermittent/Erratic Exhaust Gas Temperature Sensor Circuit, Bank 1, Sensor 5

P2484 Possible Causes

  • Faulty Exhaust Gas Temperature Sensor (EGTS), Bank 1 Sensor 5
  • Exhaust Gas Temperature Sensor, Bank 1 Sensor 5 harness is open or short-circuited
  • Poor electrical connection in Bank 1 Sensor 5 circuit of the Exhaust Gas Temperature Sensor
  • Exhaust leaks
  • Excessive particulate buildup on the sensor

How to Fix Code P2484

Check the “Possible Causes” listed above. Visually inspect the wiring harness and related connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector pins.

P2484

Symptoms

Possible

Engine light on (or service engine soon warning light)

P2484 Meaning

The Powertrain Control Module (PCM) continuously monitors the Exhaust Gas Temperature Sensor (EGTS) for proper circuit continuity and out-of-range high values. The EGTS is located in front of the Diesel Oxidation Catalyst (DOC) and/or in front of the Diesel Particulate Filter (DPF). The EGTS detects exhaust gas temperature and converts it to voltage, sending it back to the PCM with the voltage signal to control engine conditions for effective emission reduction. The PCM sets the OBDII code P2484 when the exhaust gas temperature sensor is outside factory specifications.

P2485 – Exhaust Gas Temperature Sensor Circuit / Open Bank 2 Sensor 5

P2485 Possible Causes

  • Faulty Exhaust Gas Temperature Sensor (EGTS), Bank 2 Sensor 5
  • Exhaust Gas Temperature Sensor, Bank 2 Sensor 5 harness is open or short-circuited
  • Poor electrical connection in Bank 2 Sensor 5 circuit of the Exhaust Gas Temperature Sensor
  • Exhaust leaks
  • Excessive particulate buildup on the sensor

How to Fix Code P2485

Check the “Possible Causes” listed above. Visually inspect the wiring harness and related connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector pins.

P2485

Symptoms

Possible

Check Engine Light illuminated (or Service Engine Soon warning light)

P2485 Meaning

The Powertrain Control Module (PCM) continuously monitors the Exhaust Gas Temperature Sensor (EGTS) for proper circuit continuity and out-of-range high values. The EGTS is located upstream of the Diesel Oxidation Catalyst (DOC) and/or upstream of the Diesel Particulate Filter (DPF). The EGTS detects exhaust gas temperature and converts it to voltage, sending it back to the PCM with the voltage signal to control engine conditions for effective emission reduction. The PCM sets OBDII code P2485 when the Exhaust Gas Temperature Sensor is outside factory specifications.

P2486 – Exhaust Gas Temperature Sensor Circuit, Bank 2, Sensor 5

P2486 Possible Causes

  • Faulty Exhaust Gas Temperature Sensor (EGTS), Bank 2 Sensor 5
  • Exhaust Gas Temperature Sensor, Bank 2 Sensor 5 wiring harness is open or short-circuited
  • Poor electrical connection in Bank 2 Sensor 5 circuit of the Exhaust Gas Temperature Sensor
  • Exhaust leaks
  • Excessive particulate buildup on the sensor

How to Fix Code P2486

Check the “Possible Causes” listed above. Visually inspect the wiring harness and related connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector pins.

P2486

Symptoms

Possible

Engine light on (or service engine soon warning light)

P2486 Meaning

The Powertrain Control Module (PCM) continuously monitors the Exhaust Gas Temperature Sensor (EGTS) for proper circuit continuity and out-of-range high values. The EGTS is located upstream of the Diesel Oxidation Catalyst (DOC) and/or upstream of the Diesel Particulate Filter (DPF). The EGTS detects exhaust gas temperature and converts it to voltage, sending it back to the PCM with the voltage signal to control engine conditions for effective emission reduction. The PCM sets OBDII code P2486 when the Exhaust Gas Temperature Sensor is outside factory specifications.

P2487 – Exhaust Gas Temperature Sensor Circuit, Bank 2, Sensor 5

P2487 Possible Causes

  • Faulty Exhaust Gas Temperature Sensor (EGTS), Bank 2 Sensor 5
  • Exhaust Gas Temperature Sensor, Bank 2 Sensor 5 wiring harness open or short circuit
  • Poor electrical connection in Bank 2 Sensor 5 circuit of Exhaust Gas Temperature Sensor
  • Exhaust leaks
  • Excessive particulate buildup on sensor

How to Fix Code P2487

Check the “Possible Causes” listed above. Visually inspect the wiring harness and related connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector pins.

P2487

Symptoms

Possible

Check Engine Light illuminated (or Service Engine Soon warning light)

P2487 Meaning

The Powertrain Control Module (PCM) continuously monitors the Exhaust Gas Temperature Sensor (EGTS) for proper circuit continuity and out-of-range high values. The EGTS is located upstream of the Diesel Oxidation Catalyst (DOC) and/or upstream of the Diesel Particulate Filter (DPF). The EGTS detects exhaust gas temperature and converts it to voltage, sending it back to the PCM with the voltage signal to control engine conditions for effective emission reduction. The PCM sets OBDII code P2487 when the exhaust gas temperature sensor is outside factory specifications.