P111E MINI Possible Causes

• Faulty intake air temperature sensor
• Intake air temperature sensor harness is open or shorted
• Poor electrical connection in the intake air temperature sensor circuit

How to Fix P111E MINI Code?

Start by checking the “possible causes” listed above. Visually inspect the corresponding cable harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector pins.

Possible Symptoms

Illuminated engine light (or engine service warning light soon)

P111E MINI Meaning

The intake air temperature (IAT) sensor detects the intake air temperature and sends a signal to the engine control module (ECM). The temperature sensing unit uses a thermistor that is sensitive to temperature changes. The electrical resistance of the thermistor decreases in response to rising temperature.

P111F Possible Causes

• Faulty intake air temperature sensor
• Intake air temperature sensor harness is open or shorted
• Poor electrical connection in the intake air temperature sensor circuit

How to Fix Code P111F?

Start by checking the “possible causes” listed above. Visually inspect the corresponding cable harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector pins.

Possible Symptoms

Check engine light illuminated (or service engine soon warning light)

P111F Meaning

The intake air temperature (IAT) sensor detects the intake air temperature and sends a signal to the engine control module (ECM). The temperature sensing unit uses a thermistor that is sensitive to temperature changes. The electrical resistance of the thermistor decreases in response to rising temperature.

P111F BMW Possible Causes

• Faulty intake air temperature sensor
• Intake air temperature sensor harness is open or shorted
• Poor electrical connection in the intake air temperature sensor circuit

How to Fix BMW P111F Code?

Start by checking the “possible causes” listed above. Visually inspect the corresponding cable harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector pins.

Possible Symptoms

Illuminated check engine light (or service engine soon warning light)

P111F BMW Meaning

The intake air temperature (IAT) sensor detects the intake air temperature and sends a signal to the engine control module (ECM). The temperature sensing unit uses a thermistor that is sensitive to temperature changes. The electrical resistance of the thermistor decreases in response to rising temperature.

P111F MINI Possible Causes

• Faulty intake air temperature sensor
• Intake air temperature sensor harness is open or shorted
• Poor electrical connection in the intake air temperature sensor circuit

How to Fix P111F MINI Code?

Start by checking the “possible causes” listed above. Visually inspect the corresponding cable harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector pins.

Possible Symptoms

Check engine light illuminated (or service engine soon warning light)

P111F MINI Meaning

The intake air temperature (IAT) sensor detects the intake air temperature and sends a signal to the engine control module (ECM). The temperature sensing unit uses a thermistor that is sensitive to temperature changes. The electrical resistance of the thermistor decreases in response to rising temperature.

P1120 Possible Causes

• Faulty throttle position sensor
• Throttle position sensor circuit open or shorted
• Poor electrical connection in throttle position sensor circuit
• Improperly adjusted throttle position sensor

How to Fix P1120 Code?

Start by checking the “Possible Causes” listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector pins.

Possible Symptoms

Check engine light illuminated (or service engine soon warning light)

No throttle response

P1120 Meaning

The throttle position sensor (TPS) responds to the movement of the accelerator pedal. The TPS is a rotary potentiometer sensor that provides a signal to the powertrain control module (PCM) that is linearly proportional to the throttle plate/shaft position. As the TPS is rotated by the throttle shaft, the following operating conditions are determined by the PCM:
• Closed throttle (includes idle or deceleration)
• Part throttle (includes cruise or moderate acceleration)
• Wide open throttle (includes maximum acceleration or crank flare)
• Throttle angle rate

P1120 FORD F150 Possible Causes

• Faulty throttle position sensor
• Throttle position sensor circuit open or shorted
• Poor electrical connection in throttle position sensor circuit
• Improperly adjusted throttle position sensor

How to Fix P1120 FORD F150 Code?

Start by checking the “possible causes” listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector pins.

When is the Code Detected?

A malfunction is detected when the sensor voltage sent to the Engine Control Module (ECM) is out of range.

Symptoms

Possible

Check Engine Light illuminated (or Service Engine Soon warning light)
No throttle response

P1120 FORD F150 Meaning

The Throttle Position Sensor (TPS) responds to accelerator pedal movement. The TPS is a rotary potentiometer sensor that provides a signal to the Powertrain Control Module (PCM) that is linearly proportional to the throttle plate/shaft position. As the TPS is rotated by the throttle shaft, the following operating conditions are determined by the PCM:
• Closed throttle (includes idle or deceleration)
• Part throttle (includes cruise or moderate acceleration)
• Wide open throttle (includes maximum acceleration or crank flare)
• Throttle angle rate

P1120 FORD FUSION Possible Causes

• Faulty throttle position sensor
• Throttle position sensor circuit open or shorted
• Poor electrical connection in throttle position sensor circuit
• Improperly adjusted throttle position sensor

How to Fix P1120 FORD FUSION Code?

Start by checking the “possible causes” listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector pins.

When is the Code Detected?

A malfunction is detected when the sensor voltage sent to the Engine Control Module (ECM) is out of range.

Possible Symptoms

Check engine light illuminated (or service engine soon warning light)
No throttle response

P1120 FORD FUSION Meaning

The Throttle Position Sensor (TPS) responds to accelerator pedal movement. The TPS is a rotary potentiometer sensor that provides a signal to the Powertrain Control Module (PCM) that is linearly proportional to the throttle plate/shaft position. As the TPS is rotated by the throttle shaft, the following operating conditions are determined by the PCM:
• Closed throttle (includes idle or deceleration)
• Part throttle (includes cruise or moderate acceleration)
• Wide open throttle (includes maximum acceleration or crank flare)
• Throttle angle rate

P1120 BMW Possible Causes

• Faulty pedal position sensor
• Pedal position sensor harness is open or shorted
• Poor electrical connection in pedal position sensor circuit

How to Fix BMW P1120 Code?

Start by checking the “possible causes” listed above. Visually inspect the corresponding wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector pins.

Possible Symptoms

Illuminated engine light (or service engine soon warning light)

P1120 BMW Meaning

The pedal position sensor circuit is the generic description for BMW P1120 code, but the manufacturer may have a different description for your vehicle model and year. Currently, we don’t have additional information about the OBDII BMW P1120 code.

P1120 BUICK Possible Causes

• Faulty throttle position sensor
• Throttle position sensor harness is open or shorted
• Poor electrical connection in throttle position sensor circuit
• Improperly adjusted throttle position sensor

How to Fix P1120 BUICK Code?

Begin by checking the “possible causes” listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector pins.

When is the Code Detected?

When the Powertrain Control Module (PCM) detects a signal voltage outside the normal operating range of the sensor, P1120 is set.

Possible Symptoms

Illuminated check engine light (or service engine soon warning light)

P1120 BUICK Meaning

The Throttle Position (TP) sensor is a potentiometer. The TP sensor provides a voltage signal that changes relative to throttle blade angle. This signal voltage is one of the most important inputs used by the Powertrain Control Module (PCM). The TP sensor has a 5.0 volt reference, ground, and signal circuit.
TP sensor signal voltage should be approximately 0.6 volt at idle. TP sensor voltage should increase to over 4.0 volts at wide open throttle (WOT).

P1120 CADILLAC Possible Causes

• Faulty throttle position sensor
• Throttle position sensor wiring harness is open or short-circuited
• Poor electrical connection in throttle position sensor circuit
• Improperly adjusted throttle position sensor

How to Fix P1120 CADILLAC Code?

Start by checking the “possible causes” listed above. Visually inspect the corresponding wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector pins.

When is the Code Detected?

When the Powertrain Control Module (PCM) detects a signal voltage outside the normal operating range of the sensor, P1120 is set.

Possible Symptoms

Check engine light illuminated (or service engine soon warning light)

P1120 CADILLAC Meaning

The Throttle Position (TP) sensor is a potentiometer. The TP sensor provides a voltage signal that changes relative to the throttle blade angle. This signal voltage is one of the most important inputs used by the Powertrain Control Module (PCM). The TP sensor has a 5.0-volt reference, a ground, and a signal circuit.
TP sensor signal voltage should be approximately 0.6 volts at idle. The TP sensor voltage should increase to over 4.0 volts at wide open throttle (WOT).