Jaguar Code P1362 – Ignition Coil Cylinder 2 Not Activated

Jaguar P1362 Code Description

The Jaguar diagnostic code P1362 indicates a problem with the ignition coil of engine cylinder 2. The ignition coil is responsible for generating the high voltage needed to ignite the air-fuel mixture in the combustion chamber. When the ignition coil does not activate in cylinder 2, it can lead to misfires, rough idling, and overall poor engine performance.

Common Causes of Jaguar P1362

NOTE: The listed causes may not be a complete list of all potential problems, and there may be other causes.

1. Faulty ignition coil in cylinder 2
2. Damaged or corroded wiring connected to the ignition coil
3. Issues with the Engine Control Module (ECM)
4. Poor electrical connection to the ignition coil
5. Engine overheating causing damage to the ignition coil

Symptoms of Jaguar P1362

1. Engine misfires in cylinder 2
2. Rough idling or vibrations while driving
3. Reduced acceleration and power
4. Check Engine light illuminates on the dashboard
5. Decreased fuel efficiency

How to Fix Jaguar P1362 Code

1. Start by diagnosing the specific cause of the problem using a diagnostic scanner to confirm that the ignition coil in cylinder 2 is not activating.
2. Inspect the wiring connected to the ignition coil for any signs of damage or corrosion. Repair or replace any damaged wiring.
3. Test the ignition coil of cylinder 2 using a multimeter to determine if it is functioning correctly. Replace the ignition coil if it is found to be faulty.
4. Clear the diagnostic trouble codes from the vehicle’s ECM using a scan tool and test the vehicle to ensure the issue has been resolved.
5. If the problem persists, further diagnostics may be needed to identify potential underlying issues with the ECM or other ignition system components.

Jaguar P1362 Repair Cost

Typical repair costs for resolving the Jaguar P1362 diagnostic code can vary depending on the specific cause of the issue. Generally, replacing a faulty ignition coil can cost between $100 and $300, including parts and labor. Additional costs may be incurred if wiring repairs or ECM diagnostics are needed. It is advisable to consult a certified mechanic or auto repair shop for a more accurate estimate based on the vehicle’s make and model. Keep in mind that labor rates can vary by location, typically ranging from $80 to $150 per hour.