Ford P1362 Code Description
The diagnostic trouble code P1362 (DTC) for Ford vehicles indicates a problem with the ignition coil “C” secondary circuit. This means there is a malfunction in the secondary circuit of the ignition coil responsible for firing the spark plugs in cylinder “C”. The ignition coil plays a crucial role in the ignition system by converting the battery’s low voltage into the high voltage needed to create a spark at the spark plug. When the secondary circuit malfunctions, it can lead to misfires, rough idling, and poor engine performance.
Common Causes of Ford P1362 Code
NOTE: The listed causes may not be a complete list of all potential problems, and there may be other causes.
- Faulty ignition coil “C”
- Worn spark plugs
- Damaged spark plug wires
- Issues with the ignition system wiring
- Electrical problems in the secondary circuit
Symptoms of Ford P1362
- Engine misfires
- Rough idling or stalling
- Decreased fuel efficiency
- Illuminated check engine light
- Loss of power
How to Fix Ford P1362 Code
- Diagnose the specific cause of the issue using a diagnostic scan tool to identify the faulty component.
- Replace the faulty ignition coil “C” with a new one.
- Inspect and replace any damaged spark plugs or spark plug wires.
- Check and repair any issues with the ignition system wiring.
- Clear the diagnostic codes and test the vehicle to ensure the problem is resolved.
Ford P1362 Repair Cost
The cost to repair the ignition coil “C” secondary circuit malfunction can vary depending on the specific cause of the issue and labor rates at auto repair shops. Typically, the cost to replace an ignition coil ranges from $150 to $300, while replacing spark plugs and wires can add an additional $100 to $200. The total repair cost, including parts and labor, can range from $250 to $500. It’s important to note that labor rates may vary, so it’s advisable to check with local auto repair shops for a more accurate estimate.