What are the possible causes of DTC P130F?
NOTE: The listed causes may not be a complete list of all potential issues, and there may be other causes.
- Faulty ignition switch
- Ignition switch harness is open or short-circuited
- Poor electrical connection in the ignition switch circuit
How to repair DTC P130F?
Check the “Possible Causes” listed above. Visually inspect the wiring harness and related connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector pins. Search for P130F questions and answers:
What are the possible symptoms of code P130F?
- Check engine light on (or soon-to-be maintenance warning light)
What does code P130F mean?
Control modules connected to serial data circuits monitor communication during normal vehicle operation. Operating information and commands are exchanged between control modules. Each module on the serial data circuit manages a transmission error counter and a reception error counter. The counter values increase with detected errors and decrease with error-free messages. The diagnostic trouble code (DTC) will be set when the message counter for the ignition/start voltage signal is incorrect.