Removing or deactivating an airbag is a delicate task but not impossible. The multitude of wires and fuses can confuse anyone, especially those encountering it for the first time. So, how to disable the airbag system yourself is what you might be looking for here.
So get ready now with your toolbox to disable the airbag, as we are going to give you the best solution to do it.
How to Disable the Airbag System? Find Out Here!
The reason for removing the airbag could be due to a medical issue, difficulty placing the baby seat, or any other possibility. Here you will find the best method ever designed to easily disable the airbag.
1. Purge the Power
The first step in the process of disabling your car’s airbag system is to cut off the electrical power. Since the airbag operates on electrical charge, it becomes imperative to disconnect access to the battery. So, to achieve this, cut the battery cable for a negative terminal charge. Now, leave the battery disconnected for a few minutes so that all charges dissipate to avoid any incident. Be cautious when cutting the power, as any charge left in the system could be catastrophic.
2. Remove the Fuse
To remove the fuse, you can refer to the car’s manual with the intention of removing the correct fuse. There may be many fuses under the seat. Thus, the car manual will help you reach the one directly connected to the airbag. Remove the fuse and keep it in a safe place.
3. Remove the Dashboard Cover
Find the bolt to dismantle the dashboard, which is placed with the metal cracks. Loosen all the bolts that are somewhere in the groove using a screwdriver and carefully set the dashboard aside. The Flathead crew driver is ideal for this purpose.
4. Deactivate the Passenger Airbag
Deactivating the airbag from the passenger seat is as important as from the front seats. For this, you need to find the yellow wire. At the same time, detach the harness by pushing the green locking pin. You have now successfully deactivated the passenger seat airbags.
5. Remove the Lower Steering Wheel Panel
Before removing the lower steering wheel panel, mark the position of your wheels. Make sure the wheels are straight and aligned. Now remove the airbag.
6. Finally, Disable the Airbag
After successfully completing all phases, it’s time to remove the airbag. This last step is very simple because you need to find the same yellow wire that you found when deactivating the passenger seat airbag.
The rest of the steps are the same: release the harness by pushing the green locking pin. Now, here’s how to disable the airbag system in your car!