Any driver might panic and think of one thing: how to disable the car alarm in such a frustrating situation?
There is no doubt that alarms are an important component of any car. Primarily, it is installed in vehicles to enhance the safety of the driver and the car itself.
It not only helps to deter any unauthorized attempts to access the car but also to repel theft attempts, if necessary.
But certain situations likely occur when you might need to turn it off while it’s causing loud noises or when the remote is malfunctioning, certainly. So knowing some tips from a pro can prove useful in such moments. And here’s how to do it!
How to Disable a Car Alarm in Less Than 2 Minutes?
The car alarm can malfunction almost anywhere. One thing everyone should know is that there is a security system equipped in every car and an alarm system to ensure security against theft.
It is quite comparable to the chip code of the key, which is generated by your vehicle when the ignition is turned on. This can even happen when you place the key in your vehicle’s door.
Follow these steps to get through the situation like a pro!
1. First Step – Try Opening the Door with the Key
This is the simplest option to disable the car alarm: simply place your key in the driver’s side door to unlock the vehicle. Provided you have the car keys with you, you can try unlocking the side door.
Since car alarms are designed to prevent thieves or people without car keys, the alarms turn off when a key is properly inserted to lock and unlock the car.
You can try inserting it on either side of the doors, but we recommend testing the driver’s side for more effectiveness. And if the door is already locked, car owners need to unlock it, then lock and unlock it again.
If your car is equipped with a key fob, it’s time to use it to lock and unlock the door. Car owners can apply the same technique that disables various factory car alarms.
To be more precise, drivers need to stand close enough to the car for it to recognize the key fob. After that, simply press the lock and unlock button to turn off the car alarms.
If the door locks don’t open, there could be two cases: The first case is that the key fob batteries might be dead. You just need to change the batteries and try again.
The other case is that there might be a special option to disable the alarm. You should find out if there is a “switch” button that needs to be activated.
Last but not least, remember to avoid the panic button. It is a button painted yellow or orange on the key fob. If drivers press it, their car turns on a flashlight and honks the horn.
When the panic situation is activated, you need to either press the button again or start the car and drive.
And what if you had a push-button start? Well, in that case, you can find the hidden key inside. This helps, especially when the remote is malfunctioning. Look for a small button on the side of the key fob.
Push it with your fingernail to get the hidden key. Now, I can simply unlock the car to reset the alarm.
2. Second Step – Head to the Ignition and Turn It On
This is undoubtedly the most obvious step in the car alarm disconnection guide. The driver can put the key in the ignition to disable the car alarm.
The chip key code will be generated by the vehicle, as the car can recognize the key. And when that happens, your car alarm will turn off.
3. Third Step: Reach the Alarm Fuse
In order to perform this step, car owners need to locate the alarm fuse. It is usually found just below the steering wheel.
Some modern automobiles have more than one fuse box, so you need to use a manual to find the one with the fuse powering the car alarm. Or simply look up its location online as we did.
Once you manage to locate the correct fuse, it’s time to remove it. Be careful when removing the plastic trims from your interior as they are fragile and easy to break. For this reason, car owners need to use pliers to remove the fuse.
If it is the correct fuse, the alarm should trigger immediately. However, if you fail to identify the correct one, drivers must remove and replace the fuses one by one.
Eventually, you will be able to remove the correct fuse. After replacement, car owners can use the tweezers to slide the fuse out once the alarm is off.
Normally, the alarm will remain disabled even after reinserting the fuse into the fuse box.
Nevertheless, if it reactivates immediately once drivers put the fuse back in place, the alarm has issues. You might need an auto repairer to fix this problem.
Another thing to remember is that some aftermarket car alarms don’t have a fuse in the fuse box, so make sure to check that beforehand.
4. Detach the Vehicle’s Battery
Last but not least, removing the battery is also a solution to know how to disable the car alarm. To detach the battery, you need to be able to locate it. Unlike the fuse box, a car battery is easy to find.
Drivers only have to open the hood in the engine compartment and that’s it. If you can’t find it, it’s more likely to be in the trunk to improve weight distribution and save space.
Once you manage to find the battery, it’s time to disconnect the ground wire located on the negative terminal. Drivers can find this terminal by looking for the minus symbol or the letters “NEG”.
Another way is to follow the thick black cable that connects to the car’s body. Car owners should hold a wrench to make the job easier.
By loosening the nut and sliding the cable off the terminal, you can completely turn off the alarm. But if the alarm is still activated, there might be backup batteries remaining.
In some aftermarket car alarms, small backup batteries support the alarm’s operation. So wait a moment and the computer will reset. Drivers should not force-reset the automobile’s computer as it could lose data.
The final step for car owners is to reconnect the battery after waiting for about an hour. Drivers can now reconnect the ground cable to the battery’s negative terminal.
Furthermore, drivers must ensure the cables are tightened properly and start the car to make sure there are no more issues.
Car owners can check this video from the Ternet blog if you need additional instructions on how to turn off the car alarm!
Car alarms are one of the most vital parts of any vehicle. But in case of malfunction, make sure to know these tips to solve the problem immediately, without embarrassing yourself in the middle of the road.
So, next time, don’t worry and don’t ask anyone how to disable the car alarm, just follow these tricks and avoid trouble.