P2760 Possible Causes
- Faulty control solenoid assembly
- Control solenoid assembly harness is open or shorted
- Poor electrical connection in control solenoid assembly circuit
How to Fix Code P2760
Check the “Possible Causes” listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector pins.
Possible Symptoms
Illuminated engine light (or service engine soon warning light)
P2760 Meaning
The Torque Converter Clutch Pulse Width Modulation (PWM TCC) solenoid controls fluid acting on the torque converter clutch valve. The torque converter clutch valve controls TCC application and release. The solenoid mounts to the control valve body in the transmission. The solenoid receives ignition voltage through the OFF/ON/CRANK voltage circuit. The Powertrain Control Module (PCM) controls the solenoid by providing a ground path on the TCC PWM solenoid control circuit. Current flows through the solenoid coil based on the duty cycle, the percentage of ON and OFF time. The TCC PWM solenoid provides smooth TCC engagement by operating during a duty cycle percentage of ON time.