What are the possible causes of the Dodge P1294 code?
- Vacuum leak
- Faulty throttle body
- Throttle cable is not free
- Poorly adjusted idle screw
How to fix the Dodge P1294 code?
Start by checking the “Possible Causes” listed above. Visually inspect the wiring harness and associated connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector pins.
What are the possible symptoms of the Dodge P1294 code?
- Engine light on (or Service Engine Soon warning light)
What does the Dodge P1294 code mean?
Engine speed is monitored with the engine idling, the transmission in drive, and no Manifold Absolute Pressure (MAP) or Throttle Position (TP) sensor present. The DTC will be set in the Powertrain Control Module (PCM) memory when the PCM detects engine speed more than 200 RPM above or 100 RPM below the target idle speed for 14 seconds.