P1266 FORD Possible Causes
- Faulty fuel injector 6
- Fuel injector 6 harness is open or shorted
- Poor electrical connection in fuel injector 6 circuit
- Faulty fuel injector interface module
How is the P1266 FORD code repair performed?
Start by checking the “Possible Causes” listed above. Visually inspect the wiring harness and associated connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector pins.
Possible Symptoms
- Engine light on (or service engine soon warning light)
P1266 FORD Meaning
Fuel injectors are connected to the high-pressure injection rail and deliver a calibrated amount of fuel directly into the combustion chamber. The piezo actuator is controlled by the PCM during the main injection stage for about 0 to 400 microseconds. The activation and deactivation times of the fuel injectors are controlled by the piezo actuation device, which allows for extreme precision during the injection cycle. The diagnostic trouble code (DTC) is detected by the fuel injector interface module in the secondary (rear) fuel injector circuit.