P1172 CHEVROLET – Insufficient Fuel Pump Flow

Posted by

P1172 CHEVROLET Possible Causes

  • Faulty fuel pump
  • Fuel pump wiring harness is open or shorted
  • Poor electrical connection in the fuel pump circuit

How to Fix P1172 CHEVROLET Code?

Start by checking the “possible causes” listed above. Visually inspect the corresponding wiring harness and connectors. Look for damaged components and check for broken, bent, pushed out, or corroded connector pins.

Possible Symptoms

  • Engine light on (or engine warning light soon to be on)

P1172 CHEVROLET Meaning

The fuel pump is located on the left frame rail between the fuel tanks. The Engine Control Module (ECM) provides a positive ignition voltage to the coil side of the fuel pump relay. The ECM activates the fuel pump relay, which powers the fuel pump. Fuel is transferred from the rear fuel tank to the front fuel tank to ensure that all usable fuel volume is available for the engine. This Diagnostic Trouble Code (DTC) is set when the ECM commands the transfer fuel pump to turn on and a predetermined change in the front and rear fuel level sensors does not occur.

Leave a Reply

Your email address will not be published. Required fields are marked *