P1138 2004 NISSAN SENTRA Possible Causes
- Faulty Swirl Control Valve Position Sensor
- Swirl Control Valve Position Sensor harness is open or shorted
- Swirl Control Valve Position Sensor circuit poor electrical connection
- Faulty Swirl Control Valve
How to Fix Code P1138 2004 NISSAN SENTRA?
Start by checking the “Possible Causes” listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector pins.
When is the Code Detected?
The P1138 code is detected when the target opening angle of the swirl control valve controlled by the Engine Control Module (ECM) and the input signal from the swirl control valve position sensor is not within the normal range.
Possible Symptoms
- Check Engine Light On (or Service Engine Soon Warning Light)
P1138 2004 NISSAN SENTRA Meaning
At idle and during low engine coolant temperature, the swirl control valve closes, thus the air speed in the intake passage increases, promoting fuel vaporization and producing a swirl in the combustion chamber.
Due to this operation, this system tends to increase the combustion speed of the gas mixture, improve fuel consumption, and increase stability under operating conditions.
Additionally, except at idle and when the engine coolant temperature is low, this system opens the swirl control valve.
Under this condition, this system tends to increase power by improving intake efficiency via the reduction of intake flow resistance, intake flow.
The swirl control valve is actuated by the Engine Control Module (ECM).