P1006 MINI Possible Causes
- Faulty Valvetronic eccentric shaft sensor
- Valvetronic eccentric shaft sensor wiring harness is open or short-circuited
- Poor electrical connection in the Valvetronic eccentric shaft sensor circuit
- Missing reluctor on the Valvetronic eccentric shaft sensor
How is P1006 MINI Code Repaired?
Start by checking the “Possible Causes” listed above. Visually inspect the wiring harness and associated connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector pins.
Possible Symptoms
Check engine light illuminated (or service engine soon warning light)
P1006 MINI Meaning
The Engine Control Module (ECM) monitors the Valvetronic eccentric shaft sensor. The ECM sets the OBDII code when the Valvetronic eccentric shaft sensor does not meet factory specifications.