B0010 – Passenger Front Deployment Control Step 1

Posted by

🔧 Code B0010: Passenger Airbag Malfunction – Complete Guide


🚨 Common Symptoms :

  • 🚨 Airbag warning light illuminated.
  • ⚠️ Risk of non-deployment of the passenger airbag in case of a collision.

⚠️ Possible Causes :

  1. Faulty passenger airbag (stage 1).
  2. Wiring issues:
    • Damaged harness (short circuit, cut wires).
    • Corroded connectors, bent/disconnected pins.
  3. Cross short circuit between the passenger airbag circuits and another SRS component (e.g., pretensioner, sensor).
  4. RCM module failure (rare, check last).

🔧 Repair Steps :

🔌 Safety First!

  • ⚡ Disconnect the battery and wait 15 minutes before handling the SRS system.

1. Visual Inspection :

  • Check the passenger airbag harness (under the seat, steering column).
  • Look for exposed wires, burns, or corrosion.
  • Inspect the yellow connectors (SRS-specific): clean or replace if oxidized.

2. Continuity/Resistance Test :

  • Measure the passenger airbag resistance (compare with manufacturer values).
  • Test the circuit for a cross short circuit with other SRS components.

3. Check the RCM :

  • Use a professional SRS scanner (e.g., Autel, Delphi) to:
    • Read associated codes (e.g., B0011, B0012).
    • Check the module’s live data.

4. Replacement :

  • If the airbag is faulty → Replace it with an original part.
  • If the wiring is damaged → Repair with certified SRS connectors.

📌 Meaning of Code B0010 :

  • Description: “Cross short circuit detected between the passenger airbag (stage 1) and another SRS component”.
  • RCM Operation:
    • The module monitors SRS circuits to prevent accidental deployments.
    • A short circuit between two circuits (e.g., airbag + pretensioner) triggers the code.

🚨 Key Points to Remember :

  • Never ignore this code: A non-functional airbag endangers occupants.
  • Avoid improvised repairs: Use tools and parts suitable for SRS.
  • After repair, reset the RCM with a compatible scanner.

⚠️ Warning :
The SRS system is highly sensitive. Incorrect handling may cause accidental airbag deployment. Consult a professional if you are not certified!

Need help? Share your vehicle’s make and model! 🚗🔧

Leave a Reply

Your email address will not be published. Required fields are marked *