P2A07 – O2 Sensor Negative Voltage, Bank 1 Sensor 2

P2A07 Possible Causes

Faulty O2 sensor, bank 1 sensor 2
O2 Sensor Bank 1 Sensor 2 harness is open or short-circuited

Poor electrical connection in the Bank 1 Sensor 2 O2 sensor circuit

How to Fix Code P2A07

Check the “Possible Causes” listed above. Visually inspect the wiring harness and related connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector pins.

Possible Symptoms

Check Engine Light on (or Service Engine Soon warning light)

P2A07 Meaning

The Engine Control Module (ECM) monitors the negative voltage signal from the O2 sensor. The ECM sets the OBDII code when the O2 sensor’s negative voltage is outside factory specifications.

P2A08 – O2 Sensor Negative Current Control Circuit / Open Bank 1 Sensor 3

P2A08 Possible Causes

Faulty O2 sensor, bank 1 sensor 3
O2 Sensor Bank 1 Sensor 3 harness is open or short-circuited

Poor electrical connection in the Bank 1 Sensor 3 O2 sensor circuit

How to Fix Code P2A08

Possible Symptoms

Check Engine Light on (or Service Engine Soon warning light)

P2A08 Meaning

The Engine Control Module (ECM) monitors the negative voltage signal from the O2 sensor. The ECM sets the OBDII code when the O2 sensor negative voltage is outside factory specifications.

P2A09 – O2 Sensor Negative Voltage, Bank 2 Sensor 1

P2A09 Possible Causes

Faulty O2 sensor, bank 2 sensor 1
O2 Sensor Bank 2 Sensor 1 wiring harness open or shorted

Poor electrical connection in bank 2 sensor 1 O2 sensor circuit

How to Fix Code P2A09

Check the “possible causes” listed above. Visually inspect the wiring harness and related connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector pins.

Possible Symptoms

Check engine light illuminated (or service engine soon warning light)

P2A09 Meaning

The engine control module (ECM) monitors the negative voltage signal from the O2 sensor. The ECM sets the OBDII code when the O2 sensor negative voltage is outside factory specifications.

P2A10 – O2 Sensor Negative Voltage, Bank 2 Sensor 2

P2A10 Possible Causes

Faulty O2 sensor, bank 2 sensor 2
O2 Sensor Bank 2 Sensor 2 harness is open or shorted

Poor electrical connection in the O2 sensor bank 2 sensor 2 circuit

How to Fix Code P2A10

Possible Symptoms

Check Engine Light illuminated (or Service Engine Soon warning light)

P2A10 Meaning

The Engine Control Module (ECM) monitors the negative voltage signal from the O2 sensor. The ECM sets the OBDII code when the O2 sensor negative voltage is outside factory specifications.

P2A11 – O2 Sensor Negative Voltage, Bank 2 Sensor 3

P2A11 Possible Causes

Faulty O2 sensor, bank 2 sensor 3
O2 Sensor Bank 2 Sensor 3 wiring harness open or shorted

Poor electrical connection in the Bank 2 Sensor 3 O2 sensor circuit

How to Fix Code P2A11

Possible Symptoms

Check Engine Light illuminated (or Service Engine Soon warning light)

P2A11 Meaning

The Engine Control Module (ECM) monitors the negative voltage signal from the O2 sensor. The ECM sets the OBDII code when the O2 sensor’s negative voltage is outside factory specifications.

P2BA7 – NOx Exceedance – Empty Reagent Tank

P2BA7 Possible Causes

Faulty NOx sensors
NOx sensor wiring harness open or shorted
Poor electrical connection in NOx sensor circuit
Diesel Particulate Filter (DPF)

How to Fix P2BA7 Code

Check the “Possible Causes” listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector pins.

Possible Symptoms

Illuminated engine light (or service engine soon warning light)

P2BA7 Meaning

The Selective Catalytic Reduction system reduces nitrogen oxide (NOx) emissions by injecting a measured amount of diesel exhaust fluid or reductant into the exhaust gas stream entering the Diesel Particulate Filter (DPF). In the selective catalytic reduction catalyst, the reductant reacts with NOx to form nitrogen, carbon dioxide, and water vapor. The upstream and downstream NOx sensors provide the Engine Control Module (ECM) with NOx levels from engine output and exhaust output.

The ECM uses the 2 NOx sensors to monitor exhaust NOx levels. The NOx sensor measures the amount of NOx and oxygen in the exhaust system. The first NOx sensor is located at the turbocharger outlet and monitors engine NOx emissions. The second NOx sensor is located in the DPF which monitors NOx levels exiting the DPF. The ECM varies the amount of reductant added by adjusting the reductant injector duty cycle in response to changes in engine exhaust NOx levels.

P2BA8 – NOx Exceedance – Reagent Dosing Activity Interruption

P2BA8 Possible Causes

Faulty NOx sensors
NOx sensor wiring harness is open or short-circuited
Poor electrical connection in the NOx sensor circuit
Diesel Particulate Filter (DPF)

How to Fix Code P2BA8

Check the “Possible Causes” listed above. Visually inspect the wiring harness and associated connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector pins.

Possible Symptoms

Check Engine Light illuminated (or Service Engine Soon warning light)

P2BA8 Meaning

The Selective Catalytic Reduction system reduces nitrogen oxide (NOx) emissions by injecting a measured amount of diesel exhaust fluid or reductant into the exhaust gas stream entering the Diesel Particulate Filter (DPF). In the Selective Catalytic Reduction catalyst, the reductant reacts with NOx to form nitrogen, carbon dioxide, and water vapor. The upstream and downstream NOx sensors provide the Engine Control Module (ECM) with NOx levels from the engine output and exhaust output.

The ECM uses the 2 NOx sensors to monitor exhaust NOx levels. The NOx sensor measures the amount of NOx and oxygen in the exhaust system. The first NOx sensor is located at the turbocharger outlet and monitors engine NOx emissions. The second NOx sensor is located in the DPF and monitors NOx levels exiting the DPF. The ECM varies the amount of reductant added by adjusting the reductant injector duty cycle in response to changes in engine exhaust NOx levels.

P2BA9 – NOx Exceedance – Insufficient Reagent Quality

Error code P2BA9 indicates a problem with the Selective Catalytic Reduction (SCR) system, which is designed to reduce your vehicle’s nitrogen oxide (NOx) emissions.

Meaning of Code P2BA9

The SCR system injects a diesel exhaust fluid (often called AdBlue) into the exhaust gas stream just before the diesel particulate filter (DPF). This fluid reacts with the NOx to convert it into nitrogen, carbon dioxide, and water vapor, which are less harmful substances.

Your vehicle is equipped with two NOx sensors:

The first is located at the turbocharger outlet and measures the NOx levels produced by the engine.

The second is in the DPF and monitors the NOx levels after the reduction process.

The engine control module (ECM) uses data from these two sensors to adjust the amount of reductant fluid injected to ensure optimal NOx reduction. Code P2BA9 is triggered when the ECM detects a problem in this process, suggesting that NOx levels are not being properly controlled.

Possible Symptoms

The most common symptom is the illumination of the check engine light (or a “Service engine soon” message).

Possible Causes

Several factors can cause this error code:

Faulty NOx sensors: The sensors themselves may be malfunctioning or providing incorrect readings.
Damaged NOx sensor harness: An open or shorted wire in the sensor wiring can interrupt communication.
Poor electrical connection: Loose, corroded, or damaged connections in the NOx sensor circuit can prevent a good signal.

Problem with the diesel particulate filter (DPF): Although the code refers to NOx, a clogged or faulty DPF can affect the proper operation of the SCR system.

How to Fix Code P2BA9

To diagnose and potentially resolve code P2BA9, follow these steps:

Visual inspection: Start by visually inspecting the wiring harness and connectors associated with the NOx sensors.

Check for damage: Look for any signs of physical damage, such as cut, frayed, or burnt wires.
Inspect the pins: Carefully examine the connector pins. They may be broken, bent, pushed out of the housing, or corroded, which disrupts the electrical signal.

P2BAA – NOx Exceedance – Low Reagent Consumption

P2BAA Possible Causes

Faulty NOx sensors
NOx sensor wiring harness open or shorted
Poor electrical connection in NOx sensor circuit
Diesel particulate filter (DPF)

How to Fix P2BAA Code

Possible Symptoms

Illuminated engine light (or service engine soon warning light)

P2BAA Meaning

The selective catalytic reduction system reduces nitrogen oxide (NOx) emissions by injecting a measured amount of diesel exhaust fluid or reductant into the exhaust gas stream entering the diesel particulate filter (DPF). In the selective catalytic reduction catalyst, the reductant reacts with NOx to form nitrogen, carbon dioxide, and water vapor. The upstream and downstream NOx sensors provide the engine control module (ECM) with NOx levels from engine output and exhaust output.

The ECM uses the 2 NOx sensors to control exhaust NOx levels. The NOx sensor measures the amount of NOx and oxygen in the exhaust system. The first NOx sensor is located at the turbocharger outlet and monitors engine NOx emissions. The second NOx sensor is located in the DPF which monitors NOx levels exiting the DPF. The ECM varies the amount of reductant added by adjusting the reductant injector duty cycle in response to changes in engine exhaust NOx levels.

P2BAB – NOx Exceedance – Incorrect EGR Flow

P2BAB Possible Causes

Faulty NOx sensors
NOx sensor wiring harness open or shorted
Poor electrical connection in NOx sensor circuit
Diesel Particulate Filter (DPF)

How to Fix P2BAB Code

Possible Symptoms

Check Engine Light illuminated (or Service Engine Soon warning light)

P2BAB Meaning

The Selective Catalytic Reduction system reduces nitrogen oxide (NOx) emissions by injecting a measured amount of diesel exhaust fluid or reductant into the exhaust gas stream entering the Diesel Particulate Filter (DPF). In the Selective Catalytic Reduction catalyst, the reductant reacts with NOx to form nitrogen, carbon dioxide, and water vapor. The upstream and downstream NOx sensors provide the Engine Control Module (ECM) with NOx levels from engine output and exhaust output.