B002A – Right Curtain Deployment Control 2

B002A Possible Causes

  • Faulty right side curtain airbag
  • Right side curtain airbag harness is open or shorted
  • Poor electrical connection in right side curtain airbag circuit

How is Code B002A Repaired?

Start by checking the “possible causes” listed above. Visually inspect the corresponding wiring harness and connectors. Look for damaged components and check for broken, bent, pushed out, or corroded connector pins.

Possible Symptoms

  • Airbag warning light illuminated

B002A Meaning

The driver airbag is located in the center of the steering wheel. The front passenger airbag is located in the dashboard on the front passenger side. Airbag modules feature dual inflators for the driver and/or front passenger airbag according to specifications. Dual inflators enhance airbag effectiveness by properly adjusting when both inflators are activated (simultaneously or sequentially) based on collision speed or impact severity.

B0030 – Second Row Left Side Airbag Deployment Command

B0030 Possible Causes

  • Faulty second row left side airbag
  • Second row left side airbag harness is open or shorted
  • Poor electrical connection in second row left side airbag circuit
  • Faulty Sensing and Diagnostic Module (SDM)

How is B0030 Code Repaired?

Start by checking the “Possible Causes” listed above. Visually inspect the related wiring harness and connectors. Look for damaged components and check for broken, bent, pushed out, or corroded connector pins.

Possible Symptoms

  • Airbag warning light illuminated

B0030 Meaning

When the ignition switch is turned to RUN position, the Sensing and Diagnostic Module (SDM) performs tests to diagnose critical internal malfunctions. The SDM then performs an out-of-range deployment loop voltage test and a deployment loop resistance measurement test. If the out-of-range voltage test detects a short to voltage, the resistance measurement test will not be performed.

B0031 – Control of the deployment of step 1 of the left front of the second row

B0031 Possible Causes

  • Faulty second row left front airbag
  • Second row left front airbag harness is open or shorted
  • Poor electrical connection in second row left front airbag circuit
  • Faulty Sensing and Diagnostic Module (SDM)

How to Fix Code B0031?

Start by checking the “Possible Causes” listed above. Visually inspect the corresponding wiring harness and connectors. Look for damaged components and check for broken, bent, pushed out, or corroded connector pins.

Possible Symptoms

  • Airbag warning light illuminated

B0031 Meaning

When the ignition switch is turned to the RUN position, the Sensing and Diagnostic Module (SDM) performs tests to diagnose critical internal malfunctions. The SDM then performs an out-of-range deployment loop voltage test and a deployment loop resistance measurement test. If the out-of-range voltage test detects a short to voltage, the resistance measurement test will not be performed.

B0032 – Control of the deployment of the front left second row step 2

B0032 Possible Causes

  • Faulty second row left front airbag
  • Second row left front airbag harness is open or shorted
  • Poor electrical connection in second row left front airbag circuit
  • Faulty Sensing and Diagnostic Module (SDM)

How is B0032 Code Repaired?

Start by checking the “possible causes” listed above. Visually inspect the related wiring harness and connectors. Look for damaged components and check for broken, bent, pushed out, or corroded connector pins.

Possible Symptoms

  • Airbag warning light illuminated

B0032 Meaning

When the ignition switch is turned to RUN position, the Sensing and Diagnostic Module (SDM) performs tests to diagnose critical internal malfunctions. The SDM then performs an out-of-range deployment loop voltage test and a deployment loop resistance measurement test. If the out-of-range voltage test detects a short to voltage, the resistance measurement test will not be performed.

B0032 CHEVROLET – Second stage left front row deployment control

B0032 CHEVROLET Possible Causes

  • Faulty second row left front airbag
  • Second row left front airbag harness is open or shorted
  • Poor electrical connection in second row left front airbag circuit
  • Faulty Sensing and Diagnostic Module (SDM)

How to Fix B0032 CHEVROLET Code?

Start by checking the “possible causes” listed above. Visually inspect the corresponding wiring harness and connectors. Look for damaged components and check for broken, bent, pushed out, or corroded connector pins.

Possible Symptoms

  • Airbag warning light illuminated

B0032 CHEVROLET Meaning

When the ignition switch is turned to RUN position, the Sensing and Diagnostic Module (SDM) performs tests to diagnose critical internal malfunctions. SDM then performs an out-of-range deployment loop voltage test and a deployment loop resistance measurement test. If the out-of-range voltage test detects a short to voltage, the resistance measurement test will not be performed.

B0033 – Control of the deployment of the left front step 3 of the second row

B0033 Possible Causes

  • Faulty second row left front airbag
  • Second row left front airbag harness is open or shorted
  • Poor electrical connection in second row left front airbag circuit
  • Faulty Sensing and Diagnostic Module (SDM)

How to Fix Code B0033?

Start by checking the “Possible Causes” listed above. Visually inspect the related wiring harness and connectors. Look for damaged components and check for broken, bent, pushed out, or corroded connector pins.

Possible Symptoms

  • Airbag warning light illuminated

B0033 Meaning

When the ignition switch is turned to the RUN position, the Sensing and Diagnostic Module (SDM) performs tests to diagnose critical internal malfunctions. The SDM then conducts an out-of-range deployment loop voltage test and a deployment loop resistance measurement test. If the out-of-range voltage test detects a short to voltage, the resistance measurement test will not be performed.

B0033 CHEVROLET – Left Front Second Row Deployment Control Step 3

B0033 CHEVROLET Possible Causes

  • Faulty second row left front airbag
  • Second row left front airbag harness is open or shorted
  • Poor electrical connection in second row left front airbag circuit
  • Faulty Sensing and Diagnostic Module (SDM)

How to Fix B0033 CHEVROLET Code?

Start by checking the “possible causes” listed above. Visually inspect the related wiring harness and connectors. Look for damaged components and check for broken, bent, pushed out, or corroded connector pins.

Possible Symptoms

  • Airbag warning light illuminated

B0033 CHEVROLET Meaning

When the ignition switch is turned to RUN position, the Sensing and Diagnostic Module (SDM) performs tests to diagnose critical internal malfunctions. The SDM then performs an out-of-range deployment loop voltage test and a deployment loop resistance measurement test. If the out-of-range voltage test detects a short to voltage, the resistance measurement test will not be performed.

B0035 CHEVROLET – Auxiliary Discriminating Sensor Closed or Shorted to Ground

B0035 CHEVROLET Possible Causes

  • Faulty Auxiliary Discriminating Sensor (ADS)
  • Auxiliary Discriminating Sensor harness is open or shorted
  • Poor electrical connection in the Auxiliary Discriminating Sensor circuit
  • Faulty Sensing and Diagnostic Module (SDM)

How to Fix B0035 CHEVROLET Code?

Start by checking the “Possible Causes” listed above. Visually inspect the corresponding wiring harness and connectors. Look for damaged components and check for broken, bent, pushed out, or corroded connector pins.

Possible Symptoms

  • Airbag warning light illuminated

B0035 CHEVROLET Meaning

The Inflatable Restraint Sensing and Diagnostic Module (SDM) monitors the front end sensor circuit of the inflatable restraint system for front impact detection. The SDM processes the signal provided by the front sensor to further support airbag deployment. The front sensor is an input only to the SDM and does not directly cause airbag deployment. When the ignition is turned ON, the SDM performs continuous diagnostic tests on the deployment loops to check circuit continuity and shorts to ground or voltage. If a malfunction is detected, a Diagnostic Trouble Code (DTC) will be stored.

B0036 – Open, Missing, or Shorted to Battery Auxiliary Discriminating Sensor

B0036 Possible Causes

  • Faulty auxiliary discriminating sensor (ADS)
  • Auxiliary discriminating sensor circuit open or shorted
  • Poor electrical connection in auxiliary discriminating sensor circuit
  • Faulty sensing and diagnostic module (SDM)

How is B0036 Code Repair Done?

Start by checking the “possible causes” listed above. Visually inspect the corresponding wiring harness and connectors. Look for damaged components and check for broken, bent, pushed out, or corroded connector pins.

Possible Symptoms

  • Airbag warning light illuminated

B0036 Meaning

The inflatable restraint sensing and diagnostic module (SDM) monitors the front-end sensor circuit of the inflatable restraint system for front impact detection. The SDM processes the signal provided by the front sensor to further support airbag deployment. The front sensor is an input only to the SDM and does not directly cause airbag deployment. When the ignition is turned ON, the SDM performs continuous diagnostic tests on the deployment loops to check circuit continuity and shorts to ground or voltage. If a malfunction is detected, a diagnostic trouble code (DTC) will be stored.

B0036 CHEVROLET – Auxiliary Discriminating Sensor Open, Missing or Shorted to Battery

B0036 CHEVROLET Possible Causes

  • Faulty Auxiliary Discriminating Sensor (ADS)
  • Auxiliary Discriminating Sensor harness is open or shorted
  • Poor electrical connection in the Auxiliary Discriminating Sensor circuit
  • Faulty Sensing and Diagnostic Module (SDM)

How to Fix B0036 CHEVROLET Code?

Start by checking the “possible causes” listed above. Visually inspect the corresponding wiring harness and connectors. Look for damaged components and check for broken, bent, pushed out, or corroded connector pins.

Possible Symptoms

  • Airbag warning light illuminated

B0036 CHEVROLET Meaning

The Inflatable Restraint Sensing and Diagnostic Module (SDM) monitors the front-end sensor circuit of the inflatable restraint system for front impact detection. The SDM processes the signal provided by the front sensor to further support airbag deployment. The front sensor is an input only to the SDM and does not directly cause airbag deployment. When the ignition is turned ON, the SDM performs continuous diagnostic tests on the deployment loops to check circuit continuity and shorts to ground or voltage. If a malfunction is detected, a Diagnostic Trouble Code (DTC) will be stored.