P1197 DODGE Possible Causes

• Faulty heated oxygen sensor, bank 1 sensor 1
• Very lean air/fuel ratio (intake leak)
• Very rich air/fuel ratio (injector leak or faulty mass air flow sensor)

How to Fix P1197 DODGE Code?

Start by checking the “possible causes” listed above. Visually inspect the corresponding wiring harness and connectors. Look for damaged components and check for broken, bent, pushed out, or corroded connector pins.

Possible Symptoms

• Check engine light on (or service engine soon warning light)

P1197 DODGE Meaning

The Powertrain Control Module (PCM) monitors the heated oxygen sensor, bank 1, sensor 1. The PCM sets the Diagnostic Trouble Code (DTC) when the heated oxygen sensor, bank 1, sensor 1 does not meet factory specifications. The oxygen sensor has a slow response during the test period

P1197 INFINITI Possible Causes

• Faulty fuel level sensor
• Out of gas
• Fuel level sensor harness is open or shorted
• Poor electrical connection in the fuel level sensor circuit

How to Fix P1197 INFINITI Code?

Start by checking the “possible causes” listed above. Visually inspect the related wiring harness and connectors. Look for damaged components and check for broken, bent, pushed out, or corroded connector pins.

Possible Symptoms

• Engine light on (or service engine soon warning light)

P1197 INFINITI Meaning

Fuel level sensor low input is the generic description for the P1197 Infiniti code, but the manufacturer may have a different description for your vehicle’s model and year. Currently, we don’t have further information about the OBDII P1197 Infiniti code.

P1197 JEEP Possible Causes

• Faulty heated oxygen sensor, bank 1 sensor 1
• Very lean air/fuel ratio (intake leak)
• Very rich air/fuel ratio (injector leak or faulty mass air flow sensor)

How to Fix JEEP Code P1197?

Start by checking the “possible causes” listed above. Visually inspect the corresponding wiring harness and connectors. Look for damaged components and check for broken, bent, pushed out, or corroded connector pins.

Possible Symptoms

• Engine light on (or engine service warning light soon)

P1197 JEEP Meaning

The Powertrain Control Module (PCM) monitors the heated oxygen sensor, bank 1, sensor 1. The PCM sets the Diagnostic Trouble Code (DTC) when the heated oxygen sensor, bank 1, sensor 1 does not meet factory specifications. The oxygen sensor has a slow response during the test period

P1197 MINI Possible Causes

• Faulty differential pressure sensor
• Differential pressure sensor harness is open or shorted
• Poor electrical connection in the differential pressure sensor circuit

How to Fix P1197 MINI Code?

Start by checking the “possible causes” listed above. Visually inspect the corresponding cable harness and connectors. Look for damaged components and check for broken, bent, pushed out, or corroded connector pins.

Technical Notes

Differential pressure sensor intake manifold high input, bank 1

Possible Symptoms

• Engine light on (or service engine soon warning light)

P1197 MINI Meaning

The differential pressure sensor intake manifold signal is the generic description for the P1197 Mini code, but the manufacturer may have a different description for your vehicle model and year. Currently, we do not have more information about the P1197 Mini OBDII code.

P1197 NISSAN Possible Causes

• Faulty fuel level sensor
• Out of gas
• Fuel level sensor harness is open or shorted
• Poor electrical connection in the fuel level sensor circuit

How to Fix Code P1197 NISSAN?

Start by checking the “possible causes” listed above. Visually inspect the corresponding wiring harness and connectors. Look for damaged components and check for broken, bent, pushed out, or corroded connector pins.

Possible Symptoms

• Engine light on (or service engine soon warning light)

P1197 NISSAN Meaning

Fuel Level Sensor Low Input is the generic description for Nissan code P1197, but the manufacturer may have a different description for your vehicle model and year. Currently, we don’t have more information about the Nissan P1197 OBDII code.

P1197 VOLKSWAGEN Possible Causes

• Faulty O2 sensor
• O2 sensor harness is open or shorted
• Poor electrical connection in the O2 sensor circuit

How to Fix P1197 VOLKSWAGEN Code?

Start by checking the “possible causes” listed above. Visually inspect the corresponding wiring harness and connectors. Look for damaged components and check for broken, bent, pushed out, or corroded connector pins.

Possible Symptoms

• Check Engine Light on (or Service Engine Soon warning light)

P1197 VOLKSWAGEN Meaning

Oxygen sensors (O2S) or heated oxygen sensors (HO2S) must reach a minimum operating temperature of 750 degrees F to produce an accurate voltage signal. The faster the heated oxygen sensor reaches this temperature, the sooner the sensor will start sending an accurate signal to the Engine Control Module (ECM).
To achieve the required temperature, a heating element is included inside the heated oxygen sensor. The ECM controls the heated oxygen sensor’s heating element based on signals from engine coolant temperature and engine load. The ECM controls the heater circuit by allowing current to flow to ground.
The ECM monitors the voltage signal received through the heater circuit and determines the circuit’s status by comparing the detected voltage to factory specifications.

P1198 Possible Causes

• Faulty O2 sensor
• O2 sensor harness is open or shorted
• Poor electrical connection in O2 sensor circuit

How is P1198 Code Repaired?

Start by checking the “possible causes” listed above. Visually inspect the corresponding wiring harness and connectors. Look for damaged components and check for broken, bent, pushed out, or corroded connector pins.

Possible Symptoms

• Engine light on (or engine service warning light soon)

P1198 Meaning

Oxygen sensors (O2S) or heated oxygen sensors (HO2S) must reach a minimum operating temperature of 750 degrees F to produce an accurate voltage signal. The faster the heated oxygen sensor reaches this temperature, the sooner the sensor will begin sending an accurate signal to the Engine Control Module (ECM).
To achieve the required temperature, a heating element is included inside the heated oxygen sensor. The ECM controls the heated oxygen sensor heating element based on signals from engine coolant temperature and engine load. The ECM controls the heater circuit by allowing current to flow to ground.
The ECM monitors the voltage signal received through the heater circuit and determines the circuit status by comparing the detected voltage to factory specifications.

P1198 AUDI Possible Causes

• Faulty O2 sensor
• O2 sensor wiring harness open or shorted
• Poor electrical connection in O2 sensor circuit

How to Fix P1198 AUDI Code?

Start by checking the “possible causes” listed above. Visually inspect the corresponding wiring harness and connectors. Look for damaged components and check for broken, bent, pushed out, or corroded connector pins.

Possible Symptoms

• Check Engine Light on (or Service Engine Soon warning light)

P1198 AUDI Meaning

Oxygen sensors (O2S) or heated oxygen sensors (HO2S) must reach a minimum operating temperature of 750 degrees F to produce an accurate voltage signal. The faster the heated oxygen sensor reaches this temperature, the sooner the sensor will begin sending an accurate signal to the Engine Control Module (ECM).
To achieve the required temperature, a heating element is included inside the heated oxygen sensor. The ECM controls the heated oxygen sensor’s heating element based on engine coolant temperature and engine load signals. The ECM controls the heater circuit by allowing current to flow to ground.
The ECM monitors the voltage signal received through the heater circuit and determines the circuit’s status by comparing the detected voltage to factory specifications.

P1198 BMW Possible Causes

• Faulty differential pressure sensor
• Differential pressure sensor harness is open or shorted
• Poor electrical connection in the differential pressure sensor circuit

How is BMW P1198 Code Repair Done?

Start by checking the “possible causes” listed above. Visually inspect the related wiring harness and connectors. Look for damaged components and check for broken, bent, pushed out, or corroded connector pins.

Technical Notes

Differential pressure sensor intake manifold input low, bank 1

Possible Symptoms

• Engine light on (or service engine soon warning light)

P1198 BMW Meaning

The differential pressure sensor intake manifold signal is the generic description for BMW P1198 code, but the manufacturer may have a different description for your specific vehicle model and year. Currently, we don’t have more information about the BMW P1198 OBDII code.

P1198 CHRYSLER Possible Causes

• Faulty intake temperature sensor
• Intake temperature sensor harness is open or shorted
• Poor electrical connection in the intake temperature sensor circuit

How to Fix P1198 CHRYSLER Code?

Start by checking the “possible causes” listed above. Visually inspect the corresponding wiring harness and connectors. Look for damaged components and check for broken, bent, pushed out, or corroded connector pins.

Possible Symptoms

• Engine light on (or service engine soon warning light)

P1198 CHRYSLER Meaning

Radiator temperature sensor input too high is the generic description for Chrysler code P1198, but the manufacturer may have a different description for your specific vehicle model and year. Currently, we don’t have more information about the Chrysler P1198 OBDII code.