P1171 LAND-ROVER – Left Bank Lambda Control Adaptation Over Time Too Large

P1171 LAND-ROVER Possible Causes

  • Faulty heated oxygen sensor
  • Heated oxygen sensor harness is open or shorted
  • Poor electrical connection in heated oxygen sensor circuit

How to Fix P1171 LAND-ROVER Code?

Start by checking the “possible causes” listed above. Visually inspect the corresponding wiring harness and connectors. Look for damaged components and check for broken, bent, pushed out, or corroded connector pins.

Possible Symptoms

  • Engine light on (or engine service warning light soon)

P1171 LAND-ROVER Meaning

The Engine Control Module (ECM) has the ability to adapt the values it uses to control certain outputs. This capability ensures that the Engine Management System (EMS) can comply with emissions legislation and improve engine refinement across its entire operating range.
Components to which adaptations are associated are: the APP sensor, HO2S, MAF/IAT sensor, CKP sensor, and electronic throttle body.

P1171 MINI – Ambient Pressure Sensor Learned Value Error

P1171 MINI Possible Causes

  • Faulty ambient pressure sensor
  • Ambient pressure sensor harness is open or shorted
  • Poor electrical connection in ambient pressure sensor circuit

How to Fix P1171 MINI Code?

Start by checking the “possible causes” listed above. Visually inspect the corresponding cable harness and connectors. Look for damaged components and check for broken, bent, pushed out, or corroded connector pins.

Possible Symptoms

  • Engine light on (or service engine soon warning light)

P1171 MINI Meaning

Ambient pressure sensor learned value error is the generic description for P1171 Mini code, but the manufacturer may have a different description for your specific vehicle model and year. Currently, we have no further information about the P1171 Mini OBDII code.

P1171 SUZUKI – Lean Fuel System During Power Enrichment

P1171 SUZUKI Possible Causes

  • Low fuel level
  • Low fuel pressure
  • Restricted fuel system – Clogged filter or line
  • MAF/MAP sensor malfunction

How to Fix Code P1171 SUZUKI?

Start by checking the “possible causes” listed above. Visually inspect the corresponding wiring harness and connectors. Look for damaged components and check for broken, bent, pushed out, or corroded connector pins.

Possible Symptoms

  • Check Engine Light on (or service engine soon warning light)

P1171 SUZUKI Meaning

Lean Fuel System During Power Enrichment is the generic description for Suzuki code P1171, but the manufacturer may have a different description for your vehicle model and year. Currently, we do not have additional information about the Suzuki OBDII code P1171.

P1171 VOLKSWAGEN – Range/Performance of Accelerator Pedal Position Sensor 2

P1171 VOLKSWAGEN Possible Causes

  • Faulty throttle position sensor (TPS)
  • Faulty throttle position sensor (TPS) harness is open or shorted
  • Poor electrical connection in faulty throttle position sensor (TPS) circuit
  • Faulty throttle actuator motor
  • Faulty throttle control module

How to Fix Code P1171 VOLKSWAGEN?

Start by checking the “possible causes” listed above. Visually inspect the corresponding wiring harness and connectors. Look for damaged components and check for broken, bent, pushed out, or corroded connector pins.

Possible Symptoms

  • Engine light on (or service engine soon warning light)

P1171 VOLKSWAGEN Meaning

Throttle Actuator Potentiometer Signal 2 Range/Performance is the generic description for Volkswagen code P1171, but the manufacturer may have a different description for your vehicle model and year. Currently, we have no further information about Volkswagen OBDII code P1171.

P1172 – Rear A/F Sensor 1 Row 1 Sensor 1 Circuit High Out of Range

P1172 Possible Causes

  • Faulty air/fuel ratio, bank 1 sensor 1
  • Air/fuel ratio, bank 1 Sensor 1 harness is open or shorted
  • Air/fuel ratio, bank 1 Sensor 1 circuit, poor electrical connection

How to Fix Code P1172?

Start by checking the “possible causes” listed above. Visually inspect the corresponding wiring harness and connectors. Look for damaged components and check for broken, bent, pushed out, or corroded connector pins.

Possible Symptoms

  • Engine light on (or engine service warning light soon)

P1172 Meaning

The air/fuel ratio (A/F) sensor 1 is installed in the exhaust system and detects the oxygen content in the exhaust gases. The A/F sensor sends the output voltage to the engine control module (ECM). A heating element for the sensor element is built into the A/F sensor (sensor 1). It is activated and heats the sensor to stabilize and speed up the detection of oxygen content by controlling the current flowing through the heater. An increase in current stabilizes when the voltage applied to the element electrode reaches a certain range because the amount of oxygen that is routed through the diffusion layer is limited. The current amperage is proportional to the oxygen content in the exhaust gases, so the air/fuel ratio is detected by measuring the current amperage. The ECM compares a set target air/fuel ratio with the detected air/fuel ratio and controls the fuel injection timing.
If the A/F sensor (sensor 1) voltage is low, the air/fuel ratio is lean and the ECM uses A/F feedback control to issue a Rich command. If the A/F sensor (sensor 1) voltage is high, the air/fuel ratio is rich and the ECM uses A/F feedback control to issue a Lean command.

P1172 HONDA ACCORD – Rear A/F Sensor 1, Bank 1 Sensor Circuit High Out of Range

P1172 HONDA ACCORD Possible Causes

  • Faulty air/fuel ratio, bank 1 sensor 1
  • Air/fuel ratio, bank 1 sensor 1 harness is open or shorted
  • Air/fuel ratio, bank 1 sensor 1 circuit, poor electrical connection

How to Fix P1172 HONDA ACCORD Code?

Start by checking the “possible causes” listed above. Visually inspect the corresponding wiring harness and connectors. Look for damaged components and check for broken, bent, pushed out, or corroded connector pins.

Possible Symptoms

  • Engine light on (or engine service warning light soon)

P1172 HONDA ACCORD Meaning

The air/fuel ratio (A/F) sensor 1 is installed in the exhaust system and detects the oxygen content in the exhaust gases. The A/F sensor sends the output voltage to the engine control module (ECM). A heater element for the sensor element is built into the A/F sensor (sensor 1). It is activated and heats the sensor to stabilize and speed up the detection of oxygen content by controlling the current flowing through the heater. An increase in current stabilizes when the voltage applied to the element electrode reaches a certain range because the amount of oxygen that is routed through the diffusion layer is limited. The current amperage is proportional to the oxygen content in the exhaust gases, so the air/fuel ratio is detected by measuring the current amperage. The ECM compares a set target air/fuel ratio with the detected air/fuel ratio and controls the fuel injection timing.
If the A/F sensor (sensor 1) voltage is low, the air/fuel ratio is lean and the ECM uses A/F feedback control to issue a Rich command. If the A/F sensor (sensor 1) voltage is high, the air/fuel ratio is rich and the ECM uses A/F feedback control to issue a Lean command.

P1172 ACURA – Rear A/F Sensor 1 Circuit 1 Range High

P1172 ACURA Possible Causes

  • Faulty air/fuel ratio, bank 1 sensor 1
  • Air/fuel ratio, bank 1 Sensor 1 harness is open or shorted
  • Air/fuel ratio, bank 1 Sensor 1 circuit poor electrical connection

How to Fix P1172 ACURA Code?

Start by checking the “Possible Causes” listed above. Visually inspect the corresponding wiring harness and connectors. Look for damaged components and check for broken, bent, pushed out, or corroded connector pins.

Possible Symptoms

  • Engine light on (or engine service warning light soon)

P1172 ACURA Meaning

The Air/Fuel Ratio (A/F) Sensor 1 is installed in the exhaust system and detects the oxygen content in the exhaust gases. The A/F sensor sends the output voltage to the Engine Control Module (ECM). A heater for the sensor element is built into the A/F sensor (sensor 1). It is activated and heats the sensor to stabilize and speed up the detection of oxygen content by controlling the current flowing through the heater. An increase in current stabilizes when the voltage applied to the element electrode reaches a certain range because the amount of oxygen that is routed through the diffusion layer is limited. The current amperage is proportional to the oxygen content in the exhaust gases, so the air/fuel ratio is detected by measuring the current amperage. The ECM compares a set target air/fuel ratio with the detected air/fuel ratio and controls the fuel injection timing.
If the A/F sensor (sensor 1) voltage is low, the air/fuel ratio is lean and the ECM uses A/F feedback control to issue a Rich command. If the A/F sensor (sensor 1) voltage is high, the air/fuel ratio is rich and the ECM uses A/F feedback control to issue a Lean command.

P1172 AUDI – Throttle Actuator Potentiometer Signal 2 Too Low

P1172 AUDI Possible Causes

  • Faulty throttle position sensor (TPS)
  • Throttle position sensor (TPS) harness is open or shorted
  • Poor electrical connection in the throttle position sensor (TPS) circuit
  • Faulty throttle actuator control motor
  • Faulty throttle actuator control module

How to Fix Code P1172 AUDI?

Start by checking the “possible causes” listed above. Visually inspect the corresponding wiring harness and connectors. Look for damaged components and check for broken, bent, pushed out, or corroded connector pins.

Possible Symptoms

  • Engine light on (or service engine soon warning light)

P1172 AUDI Meaning

Throttle Actuator Potentiometer Signal 2 Too Low is the generic description for Audi P1172 code, but the manufacturer may have a different description for your model and vehicle year. Currently, we don’t have more information about the Audi P1172 OBDII code.

P1172 BMW – Ambient Pressure Sensor Rationality Check

P1172 BMW Possible Causes

  • Faulty ambient pressure sensor
  • Ambient pressure sensor harness is open or shorted
  • Poor electrical connection in ambient pressure sensor circuit
 

How to Fix BMW Code P1172?

Start by checking the “possible causes” listed above. Visually inspect the corresponding wiring harness and connectors. Look for damaged components and check for broken, bent, pushed out, or corroded connector pins.

 
 

Possible Symptoms

  • Engine light on (or service engine soon warning light)
 

P1172 BMW Meaning

Ambient Pressure Sensor Rationality Check is the generic description for Bmw P1172 code, but the manufacturer may have a different description for your vehicle model and year. Currently, we don’t have more information about the P1172 Bmw OBDII code.

P1172 CHEVROLET – Insufficient Fuel Pump Flow

P1172 CHEVROLET Possible Causes

  • Faulty fuel pump
  • Fuel pump wiring harness is open or shorted
  • Poor electrical connection in the fuel pump circuit

How to Fix P1172 CHEVROLET Code?

Start by checking the “possible causes” listed above. Visually inspect the corresponding wiring harness and connectors. Look for damaged components and check for broken, bent, pushed out, or corroded connector pins.

Possible Symptoms

  • Engine light on (or engine warning light soon to be on)

P1172 CHEVROLET Meaning

The fuel pump is located on the left frame rail between the fuel tanks. The Engine Control Module (ECM) provides a positive ignition voltage to the coil side of the fuel pump relay. The ECM activates the fuel pump relay, which powers the fuel pump. Fuel is transferred from the rear fuel tank to the front fuel tank to ensure that all usable fuel volume is available for the engine. This Diagnostic Trouble Code (DTC) is set when the ECM commands the transfer fuel pump to turn on and a predetermined change in the front and rear fuel level sensors does not occur.