P113E CHRYSLER Possible Causes

• Faulty oxygen sensor (O2) 2/1
• Oxygen sensor (O2) 2/1 harness is open or shorted
• Poor electrical connection in the oxygen sensor (O2) 2/1 circuit

How to Fix Code P113E CHRYSLER?

Start by checking the “possible causes” listed above. Visually inspect the corresponding wiring harness and connectors. Look for damaged components and check for broken, bent, pushed out, or corroded connector pins.

Possible Symptoms

• Engine light on (or service engine soon warning light)

P113E CHRYSLER Meaning

The Engine Control Module (ECM) monitors the oxygen sensor (O2), bank 2, sensor 1. The ECM sets the OBDII code when the oxygen sensor (O2), bank 2, sensor 1 does not meet factory specifications.

P113E DODGE Possible Causes

• Faulty oxygen sensor (O2) 2/1
• Oxygen sensor (O2) 2/1 harness is open or shorted
• Poor electrical connection in oxygen sensor (O2) 2/1 circuit

How to Fix Code P113E DODGE?

Start by checking the “possible causes” listed above. Visually inspect the corresponding wiring harness and connectors. Look for damaged components and check for broken, bent, pushed out, or corroded connector pins.

Possible Symptoms

• Engine light on (or service engine soon warning light)

P113E DODGE Meaning

The Engine Control Module (ECM) monitors the oxygen sensor (O2), bank 2, sensor 1. The ECM sets the OBDII code when the oxygen sensor (O2), bank 2, sensor 1 does not meet factory specifications.

P113E JEEP Possible Causes

• Faulty oxygen sensor (O2) 2/1
• Oxygen sensor (O2) 2/1 wiring harness open or shorted
• Poor electrical connection in oxygen sensor (O2) 2/1 circuit

How to Fix JEEP P113E Code?

Start by checking the “possible causes” listed above. Visually inspect the corresponding wiring harness and connectors. Look for damaged components and check for broken, bent, pushed out, or corroded connector pins.

Possible Symptoms

• Engine light on (or service engine soon warning light)

P113E JEEP Meaning

The Engine Control Module (ECM) monitors the oxygen sensor (O2), bank 2, sensor 1. The ECM sets the OBDII code when the oxygen sensor (O2), bank 2, sensor 1 does not meet factory specifications.

P1140 Possible Causes

• Faulty intake valve timing control solenoid valve, bank 1
• Intake valve timing control solenoid valve circuit open or shorted, bank 1
• Poor electrical connection in intake valve timing control solenoid valve circuit, bank 1
• Faulty crankshaft position sensor
• Faulty camshaft position sensor

How to Fix Code P1140?

Start by checking the “possible causes” listed above. Visually inspect the related wiring harness and connectors. Look for damaged components and check for broken, bent, pushed out, or corroded connector pins.

Possible Symptoms

• Engine light on (or service engine soon warning light)
• Possible engine lack/loss of power
• Possible engine rough idle

P1140 Meaning

This mechanism hydraulically controls the cam phases continuously with the fixed operating angle of the intake valve.
The engine control module (ECM) receives signals such as crankshaft position, camshaft position, engine speed, and engine coolant temperature. Then, the ECM sends pulsed ON/OFF duty signals to the intake valve timing control solenoid valve based on the driving condition. This controls the intake valve closing/opening timing to increase engine torque in the low/mid speed range and output in the high speed range.
The intake valve timing control solenoid valve changes the oil amount and flow direction through the intake valve timing control unit or stops the oil flow. The longer pulse width advances the valve angle. The shorter pulse width retards the valve angle. When the ON and OFF pulse widths become equal, the solenoid valve stops the oil pressure flow to fix the intake valve angle at the control position.

P1140 2002 NISSAN SENTRA Possible Causes

• Faulty intake valve timing control solenoid valve, bank 1
• The wiring harness of the intake valve timing control solenoid valve for bank 1 is open or short-circuited
• Poor electrical connection in the circuit of the intake valve timing control solenoid valve, bank 1
• Faulty crankshaft position sensor
• Faulty camshaft position sensor

How to Fix Code P1140 2002 NISSAN SENTRA?

Start by checking the “possible causes” listed above. Visually inspect the corresponding wiring harness and connectors. Look for damaged components and check for broken, bent, pushed out, or corroded connector pins.

Technical Notes

Since the intake valve timing control solenoid valve uses oil flow to control timing, dirty oil can cause the valve to stick open or closed. Before replacing the valve, change the engine oil and filter and reset the engine code.

When is the Code Detected?

When there is a discrepancy between the target angle and the phase control angle degree, the valve will stop functioning and the ECM will trigger the P1140 code.

Possible Symptoms

• Engine light on (or engine service warning light soon)
• Possible engine misfire/loss of power
• Possible rough engine idle

P1140 2002 NISSAN SENTRA Meaning

This mechanism hydraulically controls the cam phases continuously with the fixed operating angle of the intake valve.
The engine control module (ECM) receives signals such as crankshaft position, camshaft position, engine speed, and engine coolant temperature. Then, the ECM sends ON/OFF pulse duty signals to the intake valve timing control solenoid valve based on driving conditions. This allows control of the intake valve closing/opening timing to increase engine torque in the low/mid-speed range and output in the high-speed range.
The intake valve timing control solenoid valve changes the amount of oil and the direction of flow through the intake valve timing control unit or stops the oil flow. A longer pulse width advances the valve angle. A shorter pulse width retards the valve angle. When the ON and OFF pulse widths become equal, the solenoid valve stops the oil pressure flow to fix the intake valve angle at the control position.

P1140 AUDI Possible Causes

• Faulty HO2S22 sensor
• HO2S22 sensor wiring harness open or shorted
• HO2S22 sensor circuit poor electrical connection

How to Fix P1140 AUDI Code?

Start by checking the “possible causes” listed above. Visually inspect the corresponding wiring harness and connectors. Look for damaged components and check for broken, bent, pushed out, or corroded connector pins.

Possible Symptoms

• Engine light on (or service engine soon warning light)

P1140 AUDI Meaning

HO2S22 internal resistance too high is the generic description for Audi P1140 code, but the manufacturer may have a different description for your vehicle model and year. Currently, we do not have more information about the Audi P1140 OBDII code.

P1140 BMW Possible Causes

• Faulty mass air flow
• Mass air flow harness is open or shorted
• Poor electrical connection in the mass air flow circuit

How to Fix BMW Code P1140?

Start by checking the “possible causes” listed above. Visually inspect the corresponding cable harness and connectors. Look for damaged components and check for broken, bent, pushed out, or corroded connector pins.

Possible Symptoms

• Engine light on (or service engine soon warning light)

P1140 BMW Meaning

The mass or volume air flow circuit range/performance problem is the generic description for BMW P1140 code, but the manufacturer may have a different description for your vehicle model and year. Currently, we do not have more information about the OBDII P1140 BMW code.

P1140 BUICK Possible Causes

• Faulty HO2S, Bank 1 Sensor 2
• Open or short circuit in HO2S Bank 1 Sensor 2 wiring
• Poor electrical connection in HO2S Bank 1 Sensor 2 circuit

How to Fix P1140 BUICK Code?

Start by checking the “possible causes” listed above. Visually inspect the corresponding wiring harness and connectors. Look for damaged components and check for broken, bent, pushed out, or corroded connector pins.

Possible Symptoms

• Engine Light On (or Service Engine Soon Warning Light)

P1140 BUICK Meaning

HO2S Transition Time Ratio, Bank 1 Sensor 2 is the generic description for Buick P1140 code, but the manufacturer may have a different description for your specific vehicle model and year. Currently, we don’t have more information about Buick OBDII P1140 code.

P1140 CADILLAC Possible Causes

• Faulty HO2S, Bank 1 Sensor 2
• Open or short circuit in Bank 1 Sensor 2 HO2S wiring harness
• Poor electrical connection in Bank 1 Sensor 2 HO2S circuit

How to Fix P1140 CADILLAC Code?

Start by checking the “possible causes” listed above. Visually inspect the corresponding wiring harness and connectors. Look for damaged components and check for broken, bent, pushed out, or corroded connector pins.

Possible Symptoms

• Engine light on (or engine service warning light soon)

P1140 CADILLAC Meaning

HO2S Transition Time Ratio, Bank 1 Sensor 2 is the generic description for P1140 Cadillac code, but the manufacturer may have a different description for your vehicle model and year. Currently, we don’t have more information about the OBDII P1140 Cadillac code.

P1140 CHEVROLET Possible Causes

• Faulty HO2S, Bank 1 Sensor 2
• Open or short circuit in HO2S Bank 1 Sensor 2 wiring harness
• Poor electrical connection in HO2S Bank 1 Sensor 2 circuit

How to Fix P1140 CHEVROLET Code?

Start by checking the “possible causes” listed above. Visually inspect the corresponding wiring harness and connectors. Look for damaged components and check for broken, bent, pushed out, or corroded connector pins.

Possible Symptoms

• Engine light on (or engine service warning light soon)

P1140 CHEVROLET Meaning

HO2S Transition Time Ratio, Bank 1 Sensor 2 is the generic description for Chevrolet P1140 code, but the manufacturer may have a different description for your vehicle model and year. Currently, we have no further information about Chevrolet P1140 OBDII code.