BMW P1364 Code Description

The BMW P1364 code indicates a misfire during startup in cylinder 12 of the vehicle’s engine. When this code is triggered, it means that the Engine Control Module (ECM) has detected a misfire specifically during the engine starting process in cylinder 12. A misfire occurs when there is a lack of combustion in the cylinder, resulting in rough idling, reduced power, and increased emissions. In this case, the misfire happens at the moment the engine is cranked to start.

Common Causes of BMW P1364 Code

NOTE: The listed causes may not be a complete list of all potential issues, and there may be other causes.

1. Faulty spark plugs or ignition coils
2. Clogged fuel injector
3. Vacuum leak
4. Low compression in cylinder 12
5. Engine timing issues

Symptoms of BMW P1364 Code

1. Hard starting or difficulty starting the engine
2. Rough idling or vibrations when the engine is running
3. Hesitation or stumbling during acceleration
4. Decreased fuel efficiency
5. Increased emissions

Buick P1364 Code Description

The Buick diagnostic code P1364 specifically refers to a problem with the ignition control cylinder 4 not toggling after activation. In simpler terms, this means there is an issue with the ignition system of the engine’s cylinder 4. The ignition system is responsible for igniting the air-fuel mixture in the combustion chamber to generate power for the vehicle. When cylinder 4 does not toggle after being activated, it can lead to misfires, reduced engine performance, and increased emissions.

Common Causes of Buick P1364 Code

NOTE: The listed causes may not be a complete list of all potential problems, and there could be other causes.

1. Faulty ignition coil
2. Worn spark plug
3. Defective ignition control module
4. Wiring issues
5. Engine computer malfunction

Symptoms of Buick P1364 Code

1. Engine misfires
2. Rough idling
3. Loss of power
4. Decreased fuel efficiency
5. Illumination of the check engine light

P1364 Code Cadillac Description

The diagnostic code P1364 for Cadillac vehicles indicates a problem with the ignition control cylinder 4 not toggling after activation. This means the Engine Control Module (ECM) does not detect the proper signal from the ignition system for cylinder 4, which can lead to misfires, rough idling, and poor overall engine performance. The ignition control cylinder is responsible for providing the spark to the spark plug at the right time to ignite the air-fuel mixture in the combustion chamber. When this system does not toggle after being activated, it can result in a lack of power, reduced fuel efficiency, and potential engine damage if not addressed promptly.

Common Causes of P1364 Code Cadillac

NOTE: The listed causes may not be a complete list of all potential issues, and there may be other causes.

1. Faulty ignition coil for cylinder 4
2. Wiring or connection issues in the ignition system
3. Faulty spark plug for cylinder 4
4. ECM software or hardware malfunction
5. Mechanical problems with cylinder 4 itself

Symptoms of P1364 Cadillac

1. Engine misfires or runs unevenly
2. Reduced power and acceleration
3. Poor fuel consumption
4. Illumination of the check engine light
5. Engine stalls or has difficulty starting

Chevrolet P1364 Code Description

The P1364 code for Chevrolet vehicles specifically refers to a problem with ignition control cylinder 4 not toggling after activation. In simpler terms, this means there is an issue with the ignition system in the fourth cylinder of the engine. The ignition system is responsible for generating the spark that ignites the air-fuel mixture in the combustion chamber, ultimately powering the vehicle. When this system malfunctions, it can lead to various performance problems.

Common Causes of Chevrolet P1364 Code

NOTE: The listed causes may not be a complete list of all potential problems, and there may be other causes.

1. Faulty ignition coil in cylinder 4
2. Worn or fouled spark plug in cylinder 4
3. Faulty ignition control module
4. Wiring issues or poor connections in the ignition system
5. Malfunctioning sensor affecting ignition timing in cylinder 4

Symptoms of P1364 Chevrolet

1. Rough idle or engine misfires
2. Lack of power or hesitation during acceleration
3. Engine stalling or difficulty starting
4. Increased fuel consumption
5. Poor emissions or failed emissions test
6. How to Fix Chevrolet P1364 Code
7. Inspect the ignition coil, spark plug, ignition control module, and wiring of cylinder 4 for any signs of damage or wear.
8. Replace the faulty component, whether it’s the ignition coil, spark plug, ignition control module, or sensor.
9. Clear the diagnostic codes from the vehicle’s computer and test the vehicle to ensure the problem is resolved.
10. If necessary, perform a complete ignition system tune-up to prevent future issues.

Ford Code P1364 Description

Ford code P1364 indicates a problem with the ignition coil primary circuit. The ignition coil is an essential component of the vehicle’s ignition system, responsible for converting the battery’s low voltage energy into the high voltage energy needed to ignite the fuel in the engine cylinders. When the ignition coil’s primary circuit fails, it can lead to misfires, rough idling, poor fuel consumption, and even engine stalling.

Common Causes of Ford Code P1364

NOTE: The listed causes may not be a complete list of all potential problems, and there could be other causes.

1. Faulty ignition coil
2. Damaged wiring or connectors in the ignition coil circuit
3. Faulty ignition module
4. Poor electrical connections
5. Engine overheating leading to ignition coil failure

Symptoms of Ford Code P1364

1. Engine misfires
2. Rough idling or hesitation during acceleration
3. Decreased fuel efficiency
4. Engine stalling
5. Illuminated check engine light

How to Fix Ford Code P1364

1. Diagnose the problem using a scan tool to retrieve the error code and inspecting the ignition coil circuit for any visible damage.
2. Test the ignition coil resistance and primary circuit voltage to determine if the coil is functioning properly.
3. Replace the faulty ignition coil if it is identified as the cause of the problem.
4. Inspect and repair any damaged wiring or connectors in the ignition coil circuit.
5. Clear the error code and test the vehicle to ensure the issue has been resolved.

GMC P1364 Code Description

The GMC P1364 code indicates a problem with ignition control cylinder 4 not switching after activation. In simple terms, this means the engine control module (ECM) is not receiving the expected signal from the ignition control module for cylinder 4. This can lead to issues with ignition timing, fuel delivery, and overall engine performance. The ignition control cylinder is responsible for firing the spark plug at the right moment to ignite the air-fuel mixture in the combustion chamber. When this process doesn’t work correctly, it can result in poor engine performance, increased fuel consumption, and potential engine damage over time.

Common Causes of GMC P1364 Code

NOTE: The listed causes may not be a complete list of all potential problems, and there may be other causes.

1. Faulty ignition control module
2. Wiring issues or poor connections
3. Faulty spark plug for cylinder 4
4. ECM software or hardware malfunction
5. Engine mechanical problems affecting cylinder 4

Symptoms of P1364 Code

1. Rough idle or engine misfires
2. Decreased fuel efficiency
3. Engine stalling or hesitation during acceleration
4. Illuminated check engine light
5. Loss of power or sluggish acceleration

How to Fix GMC P1364 Code

1. Perform a visual inspection of the ignition control module and wiring for any signs of damage or corrosion. Repair or replace as needed.
2. Check the spark plug for cylinder 4 and replace if fouled or worn.
3. Use a diagnostic tool to analyze the ECM for recorded error codes and reset the system after resolving the issue.
4. Test ignition control cylinder 4 to ensure proper operation and adjust timing if necessary.
5. If the problem persists, seek professional assistance for more detailed diagnosis and repair of underlying issues.

Jaguar P1364 Code Description

The Jaguar P1364 code indicates that there is no activation of the ignition coil for engine cylinder 4. The ignition coil is responsible for converting the battery’s low voltage into the high voltage needed to ignite the air-fuel mixture in the combustion chamber. When the ignition coil for cylinder 4 does not activate properly, it can lead to misfires, rough idling, and poor overall engine performance.

Common Causes of Jaguar P1364 Code

NOTE: The listed causes may not be a complete list of all potential issues, and there may be other causes.

1. Faulty ignition coil
2. Wiring issues
3. Poor connection
4. ECM malfunction
5. Spark plug problems

Symptoms of Jaguar P1364

1. Engine misfires
2. Rough idling
3. Decreased fuel efficiency
4. Loss of power
5. Check Engine light is on

How to Fix Jaguar P1364 Code

1. Start by diagnosing the specific cause of the issue using a diagnostic scanner to accurately identify the problem.
2. Inspect the ignition coil for cylinder 4 to determine if it is functioning properly. Replace the ignition coil if it is faulty.
3. Check the wiring and connections associated with the ignition coil for any damage or corrosion. Repair or replace as necessary.
4. Test the Engine Control Module (ECM) to ensure it is sending the appropriate signals to the ignition coil. Replace the ECM if necessary.
5. Clear the diagnostic codes and test the vehicle to verify that the issue has been resolved.

P1364 Code Description Lexus

The diagnostic code P1364 for Lexus vehicles indicates a problem with the circuit of the camshaft position actuator “C” of Bank 1. This code means there is an open circuit, low voltage, or high voltage issue with the camshaft position actuator, which is responsible for controlling the timing of the camshaft relative to the crankshaft. The camshaft position actuator helps optimize engine performance, fuel efficiency, and emissions by adjusting the camshaft position based on various factors such as engine load and speed.

Common Causes of P1364 Code Lexus

NOTE: The listed causes may not be a complete list of all potential problems, and there may be other causes.

1. Faulty camshaft position actuator
2. Wiring or connector issues in the camshaft position actuator circuit
3. ECM malfunction
4. Low engine oil levels or poor oil quality affecting actuator performance
5. Electrical problems such as corrosion or poor connections in the circuit

Symptoms of P1364 Code Lexus

1. Rough or irregular idle
2. Engine hesitation or stalling
3. Reduced engine power
4. Poor fuel efficiency
5. Engine may not start

How to Fix P1364 Code Lexus

1. Diagnose the issue using a diagnostic scanner to confirm the P1364 code and identify the exact cause of the problem.
2. Inspect the camshaft position actuator, wiring, and connectors for any visible damage or corrosion.
3. Test the functionality of the camshaft position actuator using a multimeter to check for proper voltage and resistance.
4. Replace the camshaft position actuator if it is found to be faulty, ensuring proper installation and connection.
5. Clear the error code from the ECM memory and test the vehicle to ensure the issue has been resolved.

Mazda P1364 Code Description

The P1364 code indicates a fault in the primary ignition coil circuit of Mazda vehicles. This code is triggered when the Engine Control Module (ECM) detects a problem with the ignition coil signal, which is responsible for generating the high voltage needed to ignite the air-fuel mixture in the engine cylinders. The primary circuit refers to the low voltage side of the ignition coil, which includes the wiring, connectors, and the coil itself.

Common Causes of Mazda P1364 Code

NOTE: The listed causes may not be a complete list of all potential issues and there may be other causes.

1. Faulty Ignition Coil: The ignition coil itself may be defective or worn out.
2. Damaged Wiring: Frayed or broken wires in the ignition coil circuit can interrupt the signal.
3. Corroded Connectors: Poor electrical connections due to corrosion can lead to intermittent failures.
4. Faulty ECM: The Engine Control Module may not be sending the correct signals to the ignition coil.
5. Faulty Crankshaft or Camshaft Position Sensors: These sensors provide critical timing information for the ignition system; if they fail, it can affect the ignition coil operation.

Symptoms of Mazda P1364 Code

1. Engine Misfires: The most common symptom, often felt as rough idling or hesitation during acceleration.
2. Poor Fuel Economy: Increased fuel consumption due to incomplete combustion.
3. Check Engine Light: Illumination of the check engine light on the dashboard.
4. Starting Difficulty: The engine may crank but not start due to inadequate spark.
5. Rough Idling: The engine may run unevenly at idle, causing vibrations.

How to Fix Mazda P1364 Code

1. Visual Inspection: Start by inspecting the ignition coil, wiring, and connectors for any visible damage or corrosion.
2. Test the Ignition Coil: Use a multimeter to check the ignition coil’s resistance and ensure it meets the manufacturer’s specifications.
3. Check Wiring and Connectors: Test the wiring continuity and inspect connectors for any signs of corrosion or loose connections.
4. Replace Faulty Components: If components are found to be faulty (ignition coil, wiring, connectors), replace them as necessary.
5. Clear Codes and Perform Road Test: After repairs, clear the diagnostic codes and perform a road test of the vehicle to ensure the issue is resolved.

Mercury P1364 Code Description

The diagnostic trouble code P1364 (DTC) for Mercury vehicles indicates a problem with the ignition coil primary circuit. The ignition coil plays a crucial role in the engine’s ignition system by converting the battery’s low voltage into the high voltage needed to ignite the spark plugs. The ignition coil’s primary circuit controls the switching of current flow to generate the spark. When this circuit malfunctions, it can lead to various performance issues in the vehicle.

Common Causes of Mercury P1364

NOTE: The listed causes may not be a complete list of all potential problems, and there could be other causes.

1. Faulty ignition coil
2. Damaged wiring in the ignition coil circuit
3. Faulty ignition control module
4. Issues with the engine computer system
5. Corrosion or loose connections in the ignition coil circuit

Symptoms of Mercury P1364

1. Engine misfires
2. Poor fuel efficiency
3. Rough idling
4. Difficulty starting the engine
5. Engine stalling

How to Fix Mercury P1364

1. Start by diagnosing the specific cause of the ignition coil primary circuit fault using a scan tool to read the DTC.
2. Inspect the ignition coil and associated wiring for any visible damage or corrosion.
3. Test the ignition coil and related components, such as the ignition control module, to determine if they are functioning properly.
4. Replace any faulty components, such as the ignition coil or damaged wiring, and ensure all connections are secure.
5. Clear the DTC from the vehicle’s computer system and test the vehicle to confirm the issue has been resolved.