OBD2 Code P1445 Infiniti: Diagnosis & Fix Guide

Understanding OBD2 Code P1445 in Your Infiniti

When your Infiniti’s check engine light illuminates and a diagnostic scan reveals code P1445, you’re dealing with a specific fault within the Evaporative Emission Control (EVAP) system. This diagnostic trouble code (DTC) is manufacturer-specific, primarily affecting Nissan and Infiniti vehicles. The Powertrain Control Module (PCM) triggers P1445 when it detects an electrical malfunction in the circuit controlling the EVAP Canister Vent Control Valve. This valve is critical for managing fuel vapor pressure and preventing hydrocarbon emissions from escaping into the atmosphere. A proper understanding of this code is essential for effective diagnosis and repair, ensuring your vehicle remains environmentally compliant and performs optimally.

What is the EVAP System and Why is it Important?

The Evaporative Emission Control (EVAP) system is a sealed network designed to capture and store fuel vapors from the fuel tank, preventing them from being released into the atmosphere. It consists of several key components:

Fuel Tank: Stores liquid fuel and generates vapors.
Charcoal Canister: Absorbs and stores fuel vapors.
Vent Control Valve: Allows fresh air into the system and seals it during pressure tests.
Purge Control Valve: Regulates the flow of stored vapors into the engine for combustion.
Fuel Tank Pressure Sensor: Monitors pressure/vacuum within the system.

The system’s primary function is environmental protection, but a malfunction can also lead to drivability issues and failed emissions tests.

Technical Definition of Code P1445

According to OBD2 standards, P1445 is defined as “EVAP Canister Vent Control Valve Circuit.” This indicates that the Powertrain Control Module (PCM) has detected an electrical problem—such as an open circuit, short circuit, or a current draw outside the expected range—within the control circuit for the vent control valve. The PCM monitors this circuit continuously, and when the actual electrical values do not match the commanded parameters, it stores the P1445 code and illuminates the check engine light.

Common Symptoms and Causes of P1445 in Infiniti Vehicles

Recognizing the symptoms and understanding the potential causes of code P1445 is the first step toward an accurate diagnosis. While sometimes the only symptom is the illuminated check engine light, other indicators can point directly to an EVAP system issue.

Identifying the Symptoms of a P1445 Code

Drivers of Infiniti models like the G35, G37, Q50, and FX35/45 may notice one or more of the following symptoms when code P1445 is present:

Illuminated Check Engine Light (MIL): The most common and often the only symptom.
Failed Emissions Test: The vehicle will not pass a state or local emissions inspection.
Fuel Odor: A noticeable smell of gasoline may be present near the vehicle if the system is unable to seal properly.
Hard Starting or Rough Idle: In some cases, an incorrect purge or vent cycle can affect the engine’s air/fuel ratio.
Decreased Fuel Efficiency: A compromised EVAP system can lead to a slight reduction in gas mileage.

Root Causes of the P1445 Diagnostic Trouble Code

The activation of code P1445 is typically related to electrical or physical failures in the vent control valve circuit. The most common causes include:

Faulty EVAP Canister Vent Control Valve: The valve itself is stuck open, stuck closed, or has an internal electrical failure.
Damaged Wiring or Connectors: Wires in the valve’s control circuit can be corroded, broken, or shorted.
Poor Electrical Connections: Loose, corroded, or damaged connectors at the valve or PCM.
Blown Fuse: A fuse protecting the EVAP system circuit may have blown.
Blocked or Kinked EVAP Vent Hose: Physical obstruction preventing the valve from operating correctly.
Defective Powertrain Control Module (PCM): In rare cases, the PCM itself may be faulty, though this is a last-resort diagnosis.

Step-by-Step Diagnostic and Repair Procedure for P1445

Diagnosing a P1445 code requires a methodical approach, starting with a visual inspection and progressing to electrical tests. Having a digital multimeter (DMM) and a reliable vehicle information source for wiring diagrams is crucial.

Initial Visual Inspection and Preparation

Before diving into electrical diagnostics, perform a thorough visual inspection. This can often reveal simple, easily fixable problems.

Locate the Vent Control Valve: On most Infiniti models, the valve is located near the fuel tank or charcoal canister at the rear of the vehicle.
Inspect Wiring and Connectors: Check the entire length of the wiring harness for the valve. Look for chafing, burns, or damage. Inspect the connector for corrosion, bent pins, or looseness.
Check the Vent Hose: Follow the hoses connected to the valve. Ensure they are not kinked, crushed, or clogged with dirt or debris.
Verify Fuses: Consult your owner’s manual to locate and check the relevant engine compartment and interior fuse boxes.

Electrical Circuit Testing with a Multimeter

If the visual inspection reveals no issues, proceed with electrical testing to pinpoint the fault.

Test for Power and Ground: With the connector disconnected from the valve, use the DMM to check for battery voltage at the power wire (with ignition ON) and a good ground at the ground circuit.
Check Valve Resistance: Set the multimeter to ohms (Ω) and measure the resistance across the two terminals of the vent control valve. Compare the reading to the manufacturer’s specifications (typically between 20-40 Ω at room temperature). An infinite reading indicates an open coil, while a zero reading indicates a short.
Check for Shorts to Ground/Voltage: Check that neither of the control circuit wires are shorted to ground or battery voltage.

Repair and Verification Steps

Once the faulty component is identified, proceed with the repair.

Repair Wiring: If the wiring is damaged, solder and heat-shrink the repairs to ensure a reliable, weatherproof connection.
Replace the Vent Control Valve: If the valve is faulty, replacement is the only option. The part is typically accessible after raising the vehicle and removing a few bolts or clips.
Clear the Code and Perform a Drive Cycle: After the repair, clear the P1445 code with your OBD2 scanner. To ensure the repair was successful and to ready the vehicle’s emissions monitors, you will need to complete a specific drive cycle. This allows the PCM to run a self-test on the EVAP system.

Conclusion: Ensuring a Lasting Fix for P1445

Diagnosing and repairing an OBD2 code P1445 on your Infiniti is a manageable task with the right tools and a systematic approach. By understanding the role of the EVAP vent control valve, methodically testing the electrical circuit, and performing a proper repair, you can resolve the check engine light and restore your vehicle’s emission system to proper working order. Always remember to complete the drive cycle to verify the fix, ensuring your Infiniti is ready to pass its next emissions test and run efficiently for miles to come.