Honda P1367 Code Description
The Honda diagnostic code P1367 indicates that no signal is being received from the Top Dead Center (TDC) sensor 2. The TDC sensor is a crucial component of the engine management system, responsible for determining the crankshaft position relative to the piston’s top dead center. This information is vital for the Engine Control Unit (ECU) to calculate ignition timing and fuel delivery.
Common Causes of Honda P1367 Code
NOTE: The listed causes may not be a complete list of all potential issues, and there could be other causes.
- Faulty TDC sensor 2
- Damaged wiring or connectors
- Corrosion in electrical connections
- ECU software problems
- Engine overheating
Symptoms of Honda P1367
- Engine misfires
- Difficulty starting the engine
- Reduced power and acceleration
- Activation of limp mode
- Check Engine light is on
How to Fix Honda P1367 Code
- Start by performing a visual inspection of the TDC sensor 2 and its wiring for any damage or corrosion.
- Use a multimeter to test the sensor’s resistance and check for proper output voltage.
- If the sensor is faulty, replace it with a new one following the manufacturer’s instructions.
- Repair or replace any damaged wiring or connectors.
- Clear the error code from the ECU’s memory using a diagnostic scanner.