P1367 Code Description Acura
The P1367 Acura code indicates a problem with the Top Dead Center (TDC) sensor 2, specifically that it is not sending a signal to the Engine Control Module (ECM). The TDC sensor is essential for the engine’s timing and ignition system, as it helps the ECM determine the position of the pistons relative to the top dead center of the compression stroke. Without this information, the engine may misfire, malfunction, or even fail to start.
Common Causes of P1367 Code Acura
NOTE: The listed causes may not be a complete list of all potential problems, and there may be other causes.
- Faulty TDC Sensor 2
- Damaged wiring or connectors in the sensor circuit
- ECM malfunction
- Corrosion or debris affecting sensor operation
- Timing belt or chain issues affecting sensor alignment
Symptoms of P1367 Code Acura
- Engine misfires
- Rough idling
- Hesitation or stalling
- Reduced power
- Poor fuel efficiency
How to Fix P1367 Code Acura
- Start by diagnosing the problem with a scan tool to confirm the P1367 code and identify the cause.
- Inspect the TDC sensor 2, wiring, and connectors for any damage or corrosion. Replace any damaged components.
- Test the TDC sensor 2 to ensure it is sending a signal correctly. If not, replace the sensor.
- Clear the code from the ECM’s memory and test the vehicle to verify that the problem is resolved.
- If the problem persists, further diagnosis may be needed to check for ECM malfunctions or other underlying issues.