If you want to replace the key fob of a new Dodge car, knowing key fob programming becomes essential. But when no working key is available, the situation becomes complex. The only thing you can do is learn how to program a Dodge key fob without it working and perform the steps accordingly.
How to Program a Dodge Key Fob
The procedure for programming a Dodge key fob involves a few simple steps that you can perform according to the following guidelines.
- Enter the Dodge car of any model and sit in the driver’s seat. Within 10 seconds, press and release the “LOCK BUTTON” on the remote five times. In this step, timing is crucial.
- Now, press the “UNLOCK BUTTON.” While holding it, insert the key into the car’s ignition and turn it to “RUN” mode. Do not remove your finger from the “UNLOCK BUTTON.”
- While pressing the “UNLOCK BUTTON,” also press the “PANIC BUTTON” for a full second. Then, release both buttons simultaneously.
- Now, hold down the “UNLOCK” and “LOCK” buttons together before releasing them simultaneously.
- Again, press the “UNLOCK BUTTON.”
- From now on, the Dodge car should recognize the key fob.
How to Program a Dodge Key Fob Without It Working
If the key fob is not working, it becomes more difficult to program it. However, there is also a solution to this problem called the Manual Programming Procedure, which does not require a scan tool.
Step 1: Connect pin 1 or pin 4 of the 16-pin data link connector to the chassis ground.
Step 2: Close all vehicle doors and turn off the ignition key.
Step 3: Turn the ignition key to the Accessory ON position.
Step 4: It is now time to turn off the ignition. As a result, the door locks will cycle once in programming mode.
Step 5: For each key fob, press any button three times in a row to execute the code programming.
Step 6: Once programming is complete, the door lock cycle will occur again.
What to Do If the Key Fob Battery Is Dead
Sometimes, the remote control battery is dead or its charge is too low to function. In this situation, try this trick to open the doors of the Dodge vehicle:
The good news is that there may be a hidden key inside the key fob. To locate it, flip the key fob over to access the opposite side and slide the switch from the upper left corner to remove the silver key. Now, this key can easily unlock the car doors.
Put the key back inside the key fob for safety reasons. Press the start button with the Dodge key fob and press the brake with your feet.
Dodge Key Fob Program FAQ
- Can I program a Dodge key fob myself without it working?
You can program a Dodge key fob without it working by following the specific steps outlined in your vehicle’s owner’s manual or by seeking advice from Dodge customer support.
The process typically involves a series of actions, including entering the vehicle and using the ignition switch.
- What information do I need to program a Dodge key without a working key?
To program a new Dodge key fob, you will generally need the vehicle identification number (VIN) and the new key fob itself. Some vehicles may also require a PIN code, which can be obtained from a Dodge dealer or customer service.
- Are there different Dodge key fob programming procedures depending on the model or year?
The programming procedure may vary depending on the Dodge model and model year. It is essential to consult your vehicle’s owner’s manual or search for instructions specific to your particular Dodge model.
- Can I program multiple Dodge key fobs using this method?
You can generally program multiple Dodge key fobs using the programming method described in your owner’s manual. The process typically allows you to program multiple key fobs to work with your vehicle.
- Are there any safety precautions I should take when programming a Dodge key fob?
Although programming a key fob is generally a straightforward process, it is essential to carefully follow the safety precautions and instructions provided.
Watch this video from Tomahawk DIY for more safety precautions and advice when programming a Dodge key fob!
Make sure you are in a secure location and have all the necessary information and components before starting the programming process.
- What should I do if I encounter difficulties or have questions during the programming process?
If you encounter difficulties or have questions while programming a Dodge key fob, it is advisable to consult your vehicle’s owner’s manual for troubleshooting guidance or contact Dodge customer service or a dealer for assistance.
They can provide advice and support to ensure the programming process is successful.
- Can a locksmith or automotive technician help you learn how to program a Dodge key fob without it working?
Professional locksmiths or automotive technicians experienced with Dodge vehicles can assist you in programming a new key fob if you are unsure of the process or encounter difficulties.
- Is it possible to program a Dodge key fob without it working for all Dodge models?
The ability to program a Dodge key fob without a working key may vary by model and model year.
While most modern Dodge vehicles support this process, it is essential to consult your vehicle’s specific documentation or contact Dodge customer support for accurate information regarding your model.
Conclusion
If you are curious about how to program a Dodge key fob without it working, follow these steps. Thus, programming a Dodge key fob should be a simple process. But it is also possible for beginners to face a problem. In that case, follow the suggestions from expert Dodge vehicle specialists.