P1270 MAZDA Possible Causes
- Wheel slippage (water, ice, mud, and snow)
- Excessive engine RPM at idle
- Driving the vehicle at high speed
How is the P1270 MAZDA code repaired?
Start by checking the “Possible Causes” listed above. Visually inspect the wiring harness and related connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector pins.
Possible Symptoms
- Check Engine Light on (or Service Engine Soon warning light)
P1270 MAZDA Meaning
Engine RPM/Vehicle Speed Limiter Indicates that the vehicle has been used in a way that resulted in exceeding an engine or vehicle calibration limit. The engine RPM and vehicle speed are continuously monitored by the Powertrain Control Module (PCM). The P1270 code is set when the RPM or speed goes out of the calibrated range.