P1245 MERCURY – Alternator Load Input Failed Low

Posted by

P1245 MERCURY Possible Causes

  • Faulty alternator/generator
  • Broken alternator belt
  • Alternator/generator harness is open or shorted
  • Poor electrical connection in the alternator/generator circuit
  • Damaged Powertrain Control Module (PCM)

How is the P1245 MERCURY code repaired?

Start by checking the “Possible Causes” listed above. Visually inspect the wiring harness and associated connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector pins.

Possible Symptoms

  • Engine light on (or maintenance engine warning light soon)

P1245 MERCURY Meaning

The Powertrain Control Module (PCM) monitors the generator load from the generator/regulator as a frequency. The fault indicates that the input is lower than what the load should be during normal operation. The load input may be low when no generator output exists.

Leave a Reply

Your email address will not be published. Required fields are marked *