P1180 FORD Possible Causes
- Restriction in the fuel line
- Clogged fuel filter
- Faulty fuel pressure regulator
- Defective fuel rail solenoid shutoff valve
- Fuel rail solenoid shutoff valve wiring harness is open or shorted
- Poor electrical connection in the fuel rail shutoff solenoid circuit
How to Fix Code P1180 FORD?
Start by checking the “possible causes” listed above. Visually inspect the corresponding wiring harness and connectors. Look for damaged components and check for broken, bent, pushed out, or corroded connector pins.
Possible Symptoms
- Engine light on (or engine service warning light soon)
P1180 FORD Meaning
The Powertrain Control Module (PCM) receives fuel tank pressure (FTP) information from the Natural Gas (NG) module, which uses this information to infer the fuel rail pressure (FRP). The Diagnostic Trouble Code (DTC) is set and the test fails when the inferred pressure is below a minimum calibrated value.