P1031 INFINITI Possible Causes
- Faulty Air/Fuel Ratio Sensor 1, Bank 1
- Air/Fuel Ratio Sensor 1 harness is open or shorted
- Poor electrical connection in the Air-Fuel Ratio Sensor 1 circuit
How is P1031 INFINITI Code Repaired?
Start by checking the “Possible Causes” listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector pins.
When is the Code Detected?
The current amperage in the Heated Air-Fuel Ratio (A/F) Sensor 1 heater circuit is outside the normal range. A voltage signal that is too low is sent to the Engine Control Module (ECM) via the Heated Air/Fuel Ratio (A/F) Sensor 1 heater.
Possible Symptoms
Check Engine Light illuminated (or Service Engine Soon warning light)
P1031 INFINITI Meaning
The Engine Control Module (ECM) performs ON/OFF service control of the Air/Fuel Ratio (A/F) Sensor 1 heater corresponding to the engine operating condition to maintain the A/F Sensor 1 element temperature within the specified range.