P0BE2 Possible Causes
- Faulty inverter with converter assembly
- Inverter with converter assembly harness open or shorted
- Inverter with converter assembly circuit poor electrical connection
- Faulty HV control ECU
What Does It Mean?
How to Fix Code P0BE2
Check the “possible causes” listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector pins.
P0BE3 Possible Symptoms
Illuminated engine light (or service engine soon warning light)
P0BE2 Meaning
The HV control ECU uses a temperature sensor integrated into the inverter to detect the motor inverter temperature. The same cooling system routed to MG1 and MG2 cools the inverter. This cooling system is independent of the engine cooling system.
The motor inverter temperature sensor characteristic is the same as the boost converter temperature sensor.
The HV control ECU limits the load based on signals from the motor inverter temperature sensor, to verify the inverter cooling system efficiency and prevent the inverter from overheating. Additionally, the HV control ECU detects a malfunction in the motor inverter temperature sensor wiring, as well as in the sensor itself.