B0028 HONDA – Decrease in resistance in the front passenger side airbag

Posted by

B0028 HONDA Possible Causes

  • Faulty front passenger side airbag
  • Front passenger side airbag harness is open or short-circuited
  • Poor electrical connection in the front passenger side airbag circuit

How to Fix B0028 HONDA Code?

Start by checking the “possible causes” listed above. Visually inspect the corresponding wiring harness and connectors. Look for damaged components and check for broken, bent, pushed out, or corroded connector pins.

Technical Notes

DTC B0028-1A: Decreased resistance in the front passenger side airbag inflator
DTC B0028-11: Short to ground in the front passenger side airbag inflator
DTC B0028-12: Short to power in the front passenger side airbag inflator

DTC B0028-13: Open or increased resistance in the front passenger side airbag inflator

Possible Symptoms

  • Airbag warning light illuminated

B0028 HONDA Meaning

The driver side airbag is located in the center of the steering wheel. The front passenger side airbag is located in the front passenger side dashboard. Airbag modules feature dual inflators for the driver side and/or front passenger side airbag according to specifications. Dual inflators enhance airbag effectiveness by properly adjusting the timing when both inflators are activated (simultaneously or sequentially) based on collision speed or impact severity.

Leave a Reply

Your email address will not be published. Required fields are marked *