B0019 SATURN – Passenger front deployment loop stage 1

Posted by

B0019 SATURN Possible Causes

  • Faulty passenger front module
  • Passenger front module harness is open or shorted
  • Poor electrical connection in passenger front module circuit
  • Faulty Sensing and Diagnostic Module (SDM)

How to Fix B0019 SATURN Code?

Start by checking the “possible causes” listed above. Visually inspect the corresponding cable harness and connectors. Look for damaged components and check for broken, bent, pushed out, or corroded connector pins.

Technical Notes

DTC B0019 01 Passenger Front Deployment Loop Stage 1 Short to Battery
DTC B0019 02 Passenger Front Deployment Loop Stage 1 Short to Ground
DTC B0019 04 Passenger Front Deployment Loop Stage 1 Circuit Open

DTC B0019 0D Passenger Front Deployment Loop Stage 1 Resistance Above Threshold
DTC B0019 0E Passenger Front Deployment Loop Stage 1 Resistance Below Threshold

Possible Symptoms

  • Airbag warning light on

B0019 SATURN Meaning

During a side or frontal collision of sufficient force, the Sensing and Diagnostic Module (SDM) of the inflatable restraint system will allow current to flow through the deployment loop to deploy an inflatable restraint module. There are 2 shorting bars used in the module connector that will short the high and low circuits together when the connector is disconnected. This helps prevent unwanted deployment of the inflator module during maintenance.

Leave a Reply

Your email address will not be published. Required fields are marked *